mirror of
https://github.com/percona/percona-toolkit.git
synced 2025-09-11 13:40:07 +00:00
788 lines
36 KiB
Plaintext
788 lines
36 KiB
Plaintext
Linux version 2.6.18-164.6.1.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Tue Nov 3 16:12:36 EST 2009
|
|
Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
|
|
BIOS-provided physical RAM map:
|
|
BIOS-e820: 0000000000010000 - 000000000009a800 (usable)
|
|
BIOS-e820: 000000000009a800 - 00000000000a0000 (reserved)
|
|
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
|
|
BIOS-e820: 0000000000100000 - 000000007f780000 (usable)
|
|
BIOS-e820: 000000007f78e000 - 000000007f790000 type 9
|
|
BIOS-e820: 000000007f790000 - 000000007f79e000 (ACPI data)
|
|
BIOS-e820: 000000007f79e000 - 000000007f7d0000 (ACPI NVS)
|
|
BIOS-e820: 000000007f7d0000 - 000000007f7e0000 (reserved)
|
|
BIOS-e820: 000000007f7ec000 - 0000000080000000 (reserved)
|
|
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
|
|
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
|
|
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
|
|
BIOS-e820: 0000000100000000 - 0000000280000000 (usable)
|
|
DMI present.
|
|
ACPI: RSDP (v002 SUN ) @ 0x00000000000fa3e0
|
|
ACPI: XSDT (v001 SUN Xxx70 0x20090619 MSFT 0x00000097) @ 0x000000007f790100
|
|
ACPI: FADT (v004 SUN Xxx70 0x20090619 MSFT 0x00000097) @ 0x000000007f790290
|
|
ACPI: MADT (v002 SUN Xxx70 0x20090619 MSFT 0x00000097) @ 0x000000007f790390
|
|
ACPI: MCFG (v001 SUN Xxx70 0x20090619 MSFT 0x00000097) @ 0x000000007f7904c0
|
|
ACPI: SLIT (v001 SUN Xxx70 0x20090619 MSFT 0x00000097) @ 0x000000007f790500
|
|
ACPI: SPMI (v005 SUN Xxx70 0x20090619 MSFT 0x00000097) @ 0x000000007f790530
|
|
ACPI: OEMB (v001 SUN Xxx70 0x20090619 MSFT 0x00000097) @ 0x000000007f79e040
|
|
ACPI: HPET (v001 SUN Xxx70 0x20090619 MSFT 0x00000097) @ 0x000000007f79a580
|
|
ACPI: DMAR (v001 SUN Xxx70 0x00000001 MSFT 0x00000097) @ 0x000000007f79e100
|
|
ACPI: SSDT (v001 SUN Xxx70 0x00000012 INTL 0x20051117) @ 0x000000007f7a07f0
|
|
ACPI: EINJ (v001 SUN Xxx70 0x20090619 MSFT 0x00000097) @ 0x000000007f79a5c0
|
|
ACPI: BERT (v001 SUN Xxx70 0x20090619 MSFT 0x00000097) @ 0x000000007f79a750
|
|
ACPI: ERST (v001 SUN Xxx70 0x20090619 MSFT 0x00000097) @ 0x000000007f79a780
|
|
ACPI: HEST (v001 SUN Xxx70 0x20090619 MSFT 0x00000097) @ 0x000000007f79a930
|
|
ACPI: DSDT (v002 SUN Xxx70 0x00000002 INTL 0x20051117) @ 0x0000000000000000
|
|
No NUMA configuration found
|
|
Faking a node at 0000000000000000-0000000280000000
|
|
Bootmem setup node 0 0000000000000000-0000000280000000
|
|
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
|
|
disabling kdump
|
|
On node 0 totalpages: 2057723
|
|
DMA zone: 2627 pages, LIFO batch:0
|
|
DMA32 zone: 503736 pages, LIFO batch:31
|
|
Normal zone: 1551360 pages, LIFO batch:31
|
|
ACPI: PM-Timer IO Port: 0x808
|
|
ACPI: Local APIC address 0xfee00000
|
|
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
|
|
Processor #0 7:10 APIC version 21
|
|
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
|
|
Processor #2 7:10 APIC version 21
|
|
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
|
|
Processor #4 7:10 APIC version 21
|
|
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
|
|
Processor #6 7:10 APIC version 21
|
|
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
|
|
Processor #1 7:10 APIC version 21
|
|
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
|
|
Processor #3 7:10 APIC version 21
|
|
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
|
|
Processor #5 7:10 APIC version 21
|
|
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
|
|
Processor #7 7:10 APIC version 21
|
|
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
|
|
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
|
|
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
|
|
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
|
|
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
|
|
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
|
|
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
|
|
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
|
|
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
|
|
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
|
|
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
|
|
ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
|
|
IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
|
|
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
|
|
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
|
|
ACPI: IRQ0 used by override.
|
|
ACPI: IRQ2 used by override.
|
|
ACPI: IRQ9 used by override.
|
|
Setting APIC routing to physical flat
|
|
ACPI: HPET id: 0xffffffff base: 0xfed00000
|
|
Using ACPI (MADT) for SMP configuration information
|
|
Nosave address range: 000000000009a000 - 000000000009b000
|
|
Nosave address range: 000000000009b000 - 00000000000a0000
|
|
Nosave address range: 00000000000a0000 - 00000000000e0000
|
|
Nosave address range: 00000000000e0000 - 0000000000100000
|
|
Nosave address range: 000000007f780000 - 000000007f78e000
|
|
Nosave address range: 000000007f78e000 - 000000007f790000
|
|
Nosave address range: 000000007f790000 - 000000007f79e000
|
|
Nosave address range: 000000007f79e000 - 000000007f7d0000
|
|
Nosave address range: 000000007f7d0000 - 000000007f7e0000
|
|
Nosave address range: 000000007f7e0000 - 000000007f7ec000
|
|
Nosave address range: 000000007f7ec000 - 0000000080000000
|
|
Nosave address range: 0000000080000000 - 00000000e0000000
|
|
Nosave address range: 00000000e0000000 - 00000000f0000000
|
|
Nosave address range: 00000000f0000000 - 00000000fee00000
|
|
Nosave address range: 00000000fee00000 - 00000000fee01000
|
|
Nosave address range: 00000000fee01000 - 00000000ffb00000
|
|
Nosave address range: 00000000ffb00000 - 0000000100000000
|
|
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
|
|
SMP: Allowing 16 CPUs, 8 hotplug CPUs
|
|
Built 1 zonelists. Total pages: 2057723
|
|
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
|
|
Initializing CPU#0
|
|
PID hash table entries: 4096 (order: 12, 32768 bytes)
|
|
Console: colour VGA+ 80x25
|
|
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
|
|
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
|
|
Checking aperture...
|
|
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
|
|
Placing software IO TLB between 0x1ca1000 - 0x5ca1000
|
|
Memory: 8148316k/10485760k available (2549k kernel code, 231116k reserved, 1292k data, 208k init)
|
|
Calibrating delay loop (skipped), value calculated using timer frequency.. 4522.11 BogoMIPS (lpj=2261056)
|
|
Security Framework v1.0.0 initialized
|
|
SELinux: Initializing.
|
|
SELinux: Starting in permissive mode
|
|
selinux_register_security: Registering secondary module capability
|
|
Capability LSM initialized as secondary
|
|
Mount-cache hash table entries: 256
|
|
CPU: L1 I cache: 32K, L1 D cache: 32K
|
|
CPU: L2 cache: 256K
|
|
CPU: L3 cache: 8192K
|
|
using mwait in idle threads.
|
|
CPU: Physical Processor ID: 0
|
|
CPU: Processor Core ID: 0
|
|
CPU0: Thermal monitoring enabled (TM1)
|
|
SMP alternatives: switching to UP code
|
|
ACPI: Core revision 20060707
|
|
Using local APIC timer interrupts.
|
|
Detected 8.312 MHz APIC timer.
|
|
SMP alternatives: switching to SMP code
|
|
Booting processor 1/8 APIC 0x2
|
|
Initializing CPU#1
|
|
Calibrating delay using timer specific routine.. 4521.98 BogoMIPS (lpj=2260990)
|
|
CPU: L1 I cache: 32K, L1 D cache: 32K
|
|
CPU: L2 cache: 256K
|
|
CPU: L3 cache: 8192K
|
|
CPU: Physical Processor ID: 0
|
|
CPU: Processor Core ID: 1
|
|
CPU1: Thermal monitoring enabled (TM1)
|
|
Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
|
|
SMP alternatives: switching to SMP code
|
|
Booting processor 2/8 APIC 0x4
|
|
Initializing CPU#2
|
|
Calibrating delay using timer specific routine.. 4521.98 BogoMIPS (lpj=2260991)
|
|
CPU: L1 I cache: 32K, L1 D cache: 32K
|
|
CPU: L2 cache: 256K
|
|
CPU: L3 cache: 8192K
|
|
CPU: Physical Processor ID: 0
|
|
CPU: Processor Core ID: 2
|
|
CPU2: Thermal monitoring enabled (TM1)
|
|
Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
|
|
SMP alternatives: switching to SMP code
|
|
Booting processor 3/8 APIC 0x6
|
|
Initializing CPU#3
|
|
Calibrating delay using timer specific routine.. 4521.95 BogoMIPS (lpj=2260978)
|
|
CPU: L1 I cache: 32K, L1 D cache: 32K
|
|
CPU: L2 cache: 256K
|
|
CPU: L3 cache: 8192K
|
|
CPU: Physical Processor ID: 0
|
|
CPU: Processor Core ID: 3
|
|
CPU3: Thermal monitoring enabled (TM1)
|
|
Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
|
|
SMP alternatives: switching to SMP code
|
|
Booting processor 4/8 APIC 0x1
|
|
Initializing CPU#4
|
|
Calibrating delay using timer specific routine.. 4521.97 BogoMIPS (lpj=2260988)
|
|
CPU: L1 I cache: 32K, L1 D cache: 32K
|
|
CPU: L2 cache: 256K
|
|
CPU: L3 cache: 8192K
|
|
CPU: Physical Processor ID: 0
|
|
CPU: Processor Core ID: 0
|
|
CPU4: Thermal monitoring enabled (TM1)
|
|
Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
|
|
SMP alternatives: switching to SMP code
|
|
Booting processor 5/8 APIC 0x3
|
|
Initializing CPU#5
|
|
Calibrating delay using timer specific routine.. 4521.97 BogoMIPS (lpj=2260988)
|
|
CPU: L1 I cache: 32K, L1 D cache: 32K
|
|
CPU: L2 cache: 256K
|
|
CPU: L3 cache: 8192K
|
|
CPU: Physical Processor ID: 0
|
|
CPU: Processor Core ID: 1
|
|
CPU5: Thermal monitoring enabled (TM1)
|
|
Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
|
|
SMP alternatives: switching to SMP code
|
|
Booting processor 6/8 APIC 0x5
|
|
Initializing CPU#6
|
|
Calibrating delay using timer specific routine.. 4521.97 BogoMIPS (lpj=2260989)
|
|
CPU: L1 I cache: 32K, L1 D cache: 32K
|
|
CPU: L2 cache: 256K
|
|
CPU: L3 cache: 8192K
|
|
CPU: Physical Processor ID: 0
|
|
CPU: Processor Core ID: 2
|
|
CPU6: Thermal monitoring enabled (TM1)
|
|
Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
|
|
SMP alternatives: switching to SMP code
|
|
Booting processor 7/8 APIC 0x7
|
|
Initializing CPU#7
|
|
Calibrating delay using timer specific routine.. 4521.97 BogoMIPS (lpj=2260987)
|
|
CPU: L1 I cache: 32K, L1 D cache: 32K
|
|
CPU: L2 cache: 256K
|
|
CPU: L3 cache: 8192K
|
|
CPU: Physical Processor ID: 0
|
|
CPU: Processor Core ID: 3
|
|
CPU7: Thermal monitoring enabled (TM1)
|
|
Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
|
|
Brought up 8 CPUs
|
|
testing NMI watchdog ... OK.
|
|
time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
|
|
time.c: Detected 2261.056 MHz processor.
|
|
sizeof(vma)=176 bytes
|
|
sizeof(page)=56 bytes
|
|
sizeof(inode)=560 bytes
|
|
sizeof(dentry)=216 bytes
|
|
sizeof(ext3inode)=760 bytes
|
|
sizeof(buffer_head)=96 bytes
|
|
sizeof(skbuff)=248 bytes
|
|
migration_cost=1,20
|
|
checking if image is initramfs... it is
|
|
Freeing initrd memory: 3379k freed
|
|
NET: Registered protocol family 16
|
|
ACPI: bus type pci registered
|
|
PCI: Using MMCONFIG at e0000000
|
|
ACPI: Interpreter enabled
|
|
ACPI: Using IOAPIC for interrupt routing
|
|
ACPI: No dock devices found.
|
|
ACPI: PCI Root Bridge [PCI0] (0000:00)
|
|
PCI: Transparent bridge - 0000:00:1e.0
|
|
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
|
|
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
|
|
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE2._PRT]
|
|
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
|
|
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
|
|
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9._PRT]
|
|
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
|
|
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
|
|
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
|
|
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
|
|
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
|
|
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
|
|
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
|
|
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
|
|
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 6 7 10 11 12 14 15)
|
|
Linux Plug and Play Support v0.97 (c) Adam Belay
|
|
pnp: PnP ACPI init
|
|
pnp: PnP ACPI: found 15 devices
|
|
usbcore: registered new driver usbfs
|
|
usbcore: registered new driver hub
|
|
PCI: Using ACPI for IRQ routing
|
|
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
|
|
NetLabel: Initializing
|
|
NetLabel: domain hash size = 128
|
|
NetLabel: protocols = UNLABELED CIPSOv4
|
|
NetLabel: unlabeled traffic allowed by default
|
|
hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0, 0
|
|
hpet0: 4 64-bit timers, 14318180 Hz
|
|
DMAR:Host address width 40
|
|
DMAR:DRHD (flags: 0x00000001)base: 0x00000000fbffe000
|
|
DMAR:RMRR base: 0x00000000000ec000 end: 0x00000000000effff
|
|
DMAR:RMRR base: 0x000000007f7ec000 end: 0x000000007f7fffff
|
|
DMAR:Unknown DMAR structure type
|
|
PCI-GART: No AMD northbridge found.
|
|
pnp: 00:0a: ioport range 0x400-0x41f has been reserved
|
|
PCI: Bridge: 0000:00:01.0
|
|
IO window: a000-afff
|
|
MEM window: fa600000-fa6fffff
|
|
PREFETCH window: disabled.
|
|
PCI: Bridge: 0000:00:02.0
|
|
IO window: b000-bfff
|
|
MEM window: fa700000-fa7fffff
|
|
PREFETCH window: disabled.
|
|
PCI: Bridge: 0000:00:03.0
|
|
IO window: c000-cfff
|
|
MEM window: fa800000-fabfffff
|
|
PREFETCH window: disabled.
|
|
PCI: Bridge: 0000:00:07.0
|
|
IO window: d000-dfff
|
|
MEM window: fac00000-faffffff
|
|
PREFETCH window: disabled.
|
|
PCI: Bridge: 0000:00:09.0
|
|
IO window: disabled.
|
|
MEM window: disabled.
|
|
PREFETCH window: disabled.
|
|
PCI: Bridge: 0000:00:1e.0
|
|
IO window: e000-efff
|
|
MEM window: fb000000-fbefffff
|
|
PREFETCH window: disabled.
|
|
PCI: Setting latency timer of device 0000:00:01.0 to 64
|
|
PCI: Setting latency timer of device 0000:00:02.0 to 64
|
|
PCI: Setting latency timer of device 0000:00:03.0 to 64
|
|
PCI: Setting latency timer of device 0000:00:07.0 to 64
|
|
PCI: Setting latency timer of device 0000:00:09.0 to 64
|
|
PCI: Setting latency timer of device 0000:00:1e.0 to 64
|
|
NET: Registered protocol family 2
|
|
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
|
|
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
|
|
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
|
|
TCP: Hash tables configured (established 262144 bind 65536)
|
|
TCP reno registered
|
|
audit: initializing netlink socket (disabled)
|
|
type=2000 audit(1260474150.129:1): initialized
|
|
Total HugeTLB memory allocated, 0
|
|
VFS: Disk quotas dquot_6.5.1
|
|
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
|
|
SELinux: Registering netfilter hooks
|
|
Initializing Cryptographic API
|
|
alg: No test for crc32c (crc32c-generic)
|
|
ksign: Installing public key data
|
|
Loading keyring
|
|
- Added public key 1DAAFEBBCEC31697
|
|
- User ID: CentOS (Kernel Module GPG key)
|
|
io scheduler noop registered
|
|
io scheduler anticipatory registered
|
|
io scheduler deadline registered
|
|
io scheduler cfq registered (default)
|
|
Boot video device is 0000:1f:05.0
|
|
PCI: Setting latency timer of device 0000:00:01.0 to 64
|
|
assign_interrupt_mode Found MSI capability
|
|
Allocate Port Service[0000:00:01.0:pcie00]
|
|
Allocate Port Service[0000:00:01.0:pcie01]
|
|
PCI: Setting latency timer of device 0000:00:02.0 to 64
|
|
assign_interrupt_mode Found MSI capability
|
|
Allocate Port Service[0000:00:02.0:pcie00]
|
|
Allocate Port Service[0000:00:02.0:pcie01]
|
|
PCI: Setting latency timer of device 0000:00:03.0 to 64
|
|
assign_interrupt_mode Found MSI capability
|
|
Allocate Port Service[0000:00:03.0:pcie00]
|
|
Allocate Port Service[0000:00:03.0:pcie01]
|
|
PCI: Setting latency timer of device 0000:00:07.0 to 64
|
|
assign_interrupt_mode Found MSI capability
|
|
Allocate Port Service[0000:00:07.0:pcie00]
|
|
Allocate Port Service[0000:00:07.0:pcie01]
|
|
PCI: Setting latency timer of device 0000:00:09.0 to 64
|
|
assign_interrupt_mode Found MSI capability
|
|
Allocate Port Service[0000:00:09.0:pcie00]
|
|
Allocate Port Service[0000:00:09.0:pcie01]
|
|
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
|
|
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [DpgPmm] OemTableId [ P001Ist] [20060707]
|
|
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ P001Cst] [20060707]
|
|
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
|
|
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [DpgPmm] OemTableId [ P002Ist] [20060707]
|
|
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ P002Cst] [20060707]
|
|
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
|
|
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [DpgPmm] OemTableId [ P003Ist] [20060707]
|
|
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ P003Cst] [20060707]
|
|
ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3])
|
|
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [DpgPmm] OemTableId [ P004Ist] [20060707]
|
|
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ P004Cst] [20060707]
|
|
ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3])
|
|
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [DpgPmm] OemTableId [ P005Ist] [20060707]
|
|
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ P005Cst] [20060707]
|
|
ACPI: CPU4 (power states: C1[C1] C2[C2] C3[C3])
|
|
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [DpgPmm] OemTableId [ P006Ist] [20060707]
|
|
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ P006Cst] [20060707]
|
|
ACPI: CPU5 (power states: C1[C1] C2[C2] C3[C3])
|
|
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [DpgPmm] OemTableId [ P007Ist] [20060707]
|
|
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ P007Cst] [20060707]
|
|
ACPI: CPU6 (power states: C1[C1] C2[C2] C3[C3])
|
|
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [DpgPmm] OemTableId [ P008Ist] [20060707]
|
|
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ P008Cst] [20060707]
|
|
ACPI: CPU7 (power states: C1[C1] C2[C2] C3[C3])
|
|
Real Time Clock Driver v1.12ac
|
|
hpet_resources: 0xfed00000 is busy
|
|
Non-volatile memory driver v1.2
|
|
Linux agpgart interface v0.101 (c) Dave Jones
|
|
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
|
|
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
|
|
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
|
|
brd: module loaded
|
|
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
|
|
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
|
|
Probing IDE interface ide0...
|
|
Probing IDE interface ide1...
|
|
ide-floppy driver 0.99.newide
|
|
usbcore: registered new driver hiddev
|
|
usbcore: registered new driver usbhid
|
|
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
|
|
PNP: No PS/2 controller found. Probing ports directly.
|
|
Failed to disable AUX port, but continuing anyway... Is this a SiS?
|
|
If AUX port is really absent please use the 'i8042.noaux' option.
|
|
serio: i8042 KBD port at 0x60,0x64 irq 1
|
|
mice: PS/2 mouse device common for all mice
|
|
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
|
|
md: bitmap version 4.39
|
|
TCP bic registered
|
|
Initializing IPsec netlink socket
|
|
NET: Registered protocol family 1
|
|
NET: Registered protocol family 17
|
|
ACPI: (supports S0 S5)
|
|
Initalizing network drop monitor service
|
|
Freeing unused kernel memory: 208k freed
|
|
Write protecting the kernel read-only data: 497k
|
|
GSI 16 sharing vector 0xD9 and IRQ 16
|
|
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 217
|
|
PCI: Setting latency timer of device 0000:00:1a.7 to 64
|
|
ehci_hcd 0000:00:1a.7: EHCI Host Controller
|
|
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
|
|
ehci_hcd 0000:00:1a.7: debug port 1
|
|
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
|
|
ehci_hcd 0000:00:1a.7: irq 217, io mem 0xfa5de000
|
|
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
|
|
usb usb1: configuration #1 chosen from 1 choice
|
|
hub 1-0:1.0: USB hub found
|
|
hub 1-0:1.0: 6 ports detected
|
|
GSI 17 sharing vector 0xE1 and IRQ 17
|
|
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 225
|
|
PCI: Setting latency timer of device 0000:00:1d.7 to 64
|
|
ehci_hcd 0000:00:1d.7: EHCI Host Controller
|
|
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
|
|
ehci_hcd 0000:00:1d.7: debug port 1
|
|
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
|
|
ehci_hcd 0000:00:1d.7: irq 225, io mem 0xfa5dc000
|
|
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
|
|
usb usb2: configuration #1 chosen from 1 choice
|
|
hub 2-0:1.0: USB hub found
|
|
hub 2-0:1.0: 6 ports detected
|
|
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
|
|
USB Universal Host Controller Interface driver v3.0
|
|
GSI 18 sharing vector 0xE9 and IRQ 18
|
|
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 233
|
|
PCI: Setting latency timer of device 0000:00:1a.0 to 64
|
|
uhci_hcd 0000:00:1a.0: UHCI Host Controller
|
|
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
|
|
uhci_hcd 0000:00:1a.0: irq 233, io base 0x00009800
|
|
usb usb3: configuration #1 chosen from 1 choice
|
|
hub 3-0:1.0: USB hub found
|
|
hub 3-0:1.0: 2 ports detected
|
|
usb 1-3: new high speed USB device using ehci_hcd and address 2
|
|
GSI 19 sharing vector 0x32 and IRQ 19
|
|
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 50
|
|
PCI: Setting latency timer of device 0000:00:1a.1 to 64
|
|
uhci_hcd 0000:00:1a.1: UHCI Host Controller
|
|
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
|
|
uhci_hcd 0000:00:1a.1: irq 50, io base 0x00009880
|
|
usb usb4: configuration #1 chosen from 1 choice
|
|
hub 4-0:1.0: USB hub found
|
|
hub 4-0:1.0: 2 ports detected
|
|
GSI 20 sharing vector 0x3A and IRQ 20
|
|
ACPI: PCI Interrupt 0000:00:1a.2[D] -> GSI 19 (level, low) -> IRQ 58
|
|
PCI: Setting latency timer of device 0000:00:1a.2 to 64
|
|
uhci_hcd 0000:00:1a.2: UHCI Host Controller
|
|
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
|
|
uhci_hcd 0000:00:1a.2: irq 58, io base 0x00009c00
|
|
usb usb5: configuration #1 chosen from 1 choice
|
|
hub 5-0:1.0: USB hub found
|
|
hub 5-0:1.0: 2 ports detected
|
|
usb 1-3: configuration #1 chosen from 1 choice
|
|
hub 1-3:1.0: USB hub found
|
|
hub 1-3:1.0: 2 ports detected
|
|
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 225
|
|
PCI: Setting latency timer of device 0000:00:1d.0 to 64
|
|
uhci_hcd 0000:00:1d.0: UHCI Host Controller
|
|
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
|
|
uhci_hcd 0000:00:1d.0: irq 225, io base 0x00009080
|
|
usb usb6: configuration #1 chosen from 1 choice
|
|
hub 6-0:1.0: USB hub found
|
|
hub 6-0:1.0: 2 ports detected
|
|
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 58
|
|
PCI: Setting latency timer of device 0000:00:1d.1 to 64
|
|
uhci_hcd 0000:00:1d.1: UHCI Host Controller
|
|
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
|
|
uhci_hcd 0000:00:1d.1: irq 58, io base 0x00009400
|
|
usb usb7: configuration #1 chosen from 1 choice
|
|
hub 7-0:1.0: USB hub found
|
|
hub 7-0:1.0: 2 ports detected
|
|
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 217
|
|
PCI: Setting latency timer of device 0000:00:1d.2 to 64
|
|
uhci_hcd 0000:00:1d.2: UHCI Host Controller
|
|
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
|
|
uhci_hcd 0000:00:1d.2: irq 217, io base 0x00009480
|
|
usb usb8: configuration #1 chosen from 1 choice
|
|
hub 8-0:1.0: USB hub found
|
|
hub 8-0:1.0: 2 ports detected
|
|
SCSI subsystem initialized
|
|
Fusion MPT base driver 3.04.07rh
|
|
Copyright (c) 1999-2008 LSI Corporation
|
|
Fusion MPT SAS Host driver 3.04.07rh
|
|
GSI 21 sharing vector 0x42 and IRQ 21
|
|
ACPI: PCI Interrupt 0000:0d:00.0[A] -> GSI 24 (level, low) -> IRQ 66
|
|
mptbase: ioc0: Initiating bringup
|
|
usb 2-3: new high speed USB device using ehci_hcd and address 2
|
|
usb 2-3: configuration #1 chosen from 1 choice
|
|
hub 2-3:1.0: USB hub found
|
|
hub 2-3:1.0: 4 ports detected
|
|
ioc0: LSISAS1068E B2: Capabilities={Initiator}
|
|
PCI: Setting latency timer of device 0000:0d:00.0 to 64
|
|
usb 5-1: new low speed USB device using uhci_hcd and address 2
|
|
usb 5-1: configuration #1 chosen from 1 choice
|
|
input: American Megatrends Inc. Virtual Keyboard and Mouse as /class/input/input0
|
|
input: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-1
|
|
input: American Megatrends Inc. Virtual Keyboard and Mouse as /class/input/input1
|
|
input: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-1
|
|
scsi0 : ioc0: LSISAS1068E B2, FwRev=011b0200h, Ports=1, MaxQ=277, IRQ=66
|
|
Vendor: HITACHI Model: H103030SCSUN300G Rev: A2A8
|
|
Type: Direct-Access ANSI SCSI revision: 06
|
|
Vendor: HITACHI Model: H103030SCSUN300G Rev: A2A8
|
|
Type: Direct-Access ANSI SCSI revision: 06
|
|
Vendor: HITACHI Model: H103030SCSUN300G Rev: A2A8
|
|
Type: Direct-Access ANSI SCSI revision: 06
|
|
Vendor: LSILOGIC Model: Logical Volume Rev: 3000
|
|
Type: Direct-Access ANSI SCSI revision: 02
|
|
SCSI device sda: 875974656 512-byte hdwr sectors (448499 MB)
|
|
sda: Write Protect is off
|
|
sda: Mode Sense: 03 00 00 08
|
|
SCSI device sda: drive cache: write through
|
|
SCSI device sda: 875974656 512-byte hdwr sectors (448499 MB)
|
|
sda: Write Protect is off
|
|
sda: Mode Sense: 03 00 00 08
|
|
SCSI device sda: drive cache: write through
|
|
sda: sda1 sda2
|
|
sd 0:1:0:0: Attached scsi disk sda
|
|
GSI 22 sharing vector 0x4A and IRQ 22
|
|
ACPI: PCI Interrupt 0000:13:00.0[A] -> GSI 30 (level, low) -> IRQ 74
|
|
mptbase: ioc1: Initiating bringup
|
|
ioc1: LSISAS1068E B3: Capabilities={Initiator}
|
|
PCI: Setting latency timer of device 0000:13:00.0 to 64
|
|
scsi1 : ioc1: LSISAS1068E B3, FwRev=011a0000h, Ports=1, MaxQ=336, IRQ=74
|
|
Vendor: ATA Model: HITACHI HUA7210S Rev: AC4A
|
|
Type: Direct-Access ANSI SCSI revision: 05
|
|
SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB)
|
|
sdb: Write Protect is off
|
|
sdb: Mode Sense: 73 00 00 08
|
|
SCSI device sdb: drive cache: write through
|
|
SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB)
|
|
sdb: Write Protect is off
|
|
sdb: Mode Sense: 73 00 00 08
|
|
SCSI device sdb: drive cache: write through
|
|
sdb: sdb1
|
|
sd 1:0:0:0: Attached scsi disk sdb
|
|
Vendor: ATA Model: HITACHI HUA7210S Rev: A90A
|
|
Type: Direct-Access ANSI SCSI revision: 05
|
|
SCSI device sdc: 1953525168 512-byte hdwr sectors (1000205 MB)
|
|
sdc: Write Protect is off
|
|
sdc: Mode Sense: 73 00 00 08
|
|
SCSI device sdc: drive cache: write through
|
|
SCSI device sdc: 1953525168 512-byte hdwr sectors (1000205 MB)
|
|
sdc: Write Protect is off
|
|
sdc: Mode Sense: 73 00 00 08
|
|
SCSI device sdc: drive cache: write through
|
|
sdc: sdc1
|
|
sd 1:0:1:0: Attached scsi disk sdc
|
|
Vendor: ATA Model: HITACHI HUA7210S Rev: A90A
|
|
Type: Direct-Access ANSI SCSI revision: 05
|
|
SCSI device sdd: 1953525168 512-byte hdwr sectors (1000205 MB)
|
|
sdd: Write Protect is off
|
|
sdd: Mode Sense: 73 00 00 08
|
|
SCSI device sdd: drive cache: write through
|
|
SCSI device sdd: 1953525168 512-byte hdwr sectors (1000205 MB)
|
|
sdd: Write Protect is off
|
|
sdd: Mode Sense: 73 00 00 08
|
|
SCSI device sdd: drive cache: write through
|
|
sdd: sdd1
|
|
sd 1:0:2:0: Attached scsi disk sdd
|
|
Vendor: ATA Model: HITACHI HUA7210S Rev: A90A
|
|
Type: Direct-Access ANSI SCSI revision: 05
|
|
SCSI device sde: 1953525168 512-byte hdwr sectors (1000205 MB)
|
|
sde: Write Protect is off
|
|
sde: Mode Sense: 73 00 00 08
|
|
SCSI device sde: drive cache: write through
|
|
SCSI device sde: 1953525168 512-byte hdwr sectors (1000205 MB)
|
|
sde: Write Protect is off
|
|
sde: Mode Sense: 73 00 00 08
|
|
SCSI device sde: drive cache: write through
|
|
sde: sde1
|
|
sd 1:0:3:0: Attached scsi disk sde
|
|
Vendor: ATA Model: HITACHI HUA7210S Rev: A90A
|
|
Type: Direct-Access ANSI SCSI revision: 05
|
|
SCSI device sdf: 1953525168 512-byte hdwr sectors (1000205 MB)
|
|
sdf: Write Protect is off
|
|
sdf: Mode Sense: 73 00 00 08
|
|
SCSI device sdf: drive cache: write through
|
|
SCSI device sdf: 1953525168 512-byte hdwr sectors (1000205 MB)
|
|
sdf: Write Protect is off
|
|
sdf: Mode Sense: 73 00 00 08
|
|
SCSI device sdf: drive cache: write through
|
|
sdf: unknown partition table
|
|
sd 1:0:4:0: Attached scsi disk sdf
|
|
Vendor: ATA Model: HITACHI HUA7210S Rev: A90A
|
|
Type: Direct-Access ANSI SCSI revision: 05
|
|
SCSI device sdg: 1953525168 512-byte hdwr sectors (1000205 MB)
|
|
sdg: Write Protect is off
|
|
sdg: Mode Sense: 73 00 00 08
|
|
SCSI device sdg: drive cache: write through
|
|
SCSI device sdg: 1953525168 512-byte hdwr sectors (1000205 MB)
|
|
sdg: Write Protect is off
|
|
sdg: Mode Sense: 73 00 00 08
|
|
SCSI device sdg: drive cache: write through
|
|
sdg: unknown partition table
|
|
sd 1:0:5:0: Attached scsi disk sdg
|
|
Vendor: ATA Model: HITACHI HUA7210S Rev: A90A
|
|
Type: Direct-Access ANSI SCSI revision: 05
|
|
SCSI device sdh: 1953525168 512-byte hdwr sectors (1000205 MB)
|
|
sdh: Write Protect is off
|
|
sdh: Mode Sense: 73 00 00 08
|
|
SCSI device sdh: drive cache: write through
|
|
SCSI device sdh: 1953525168 512-byte hdwr sectors (1000205 MB)
|
|
sdh: Write Protect is off
|
|
sdh: Mode Sense: 73 00 00 08
|
|
SCSI device sdh: drive cache: write through
|
|
sdh: unknown partition table
|
|
sd 1:0:6:0: Attached scsi disk sdh
|
|
Vendor: ATA Model: HITACHI HUA7210S Rev: AC4A
|
|
Type: Direct-Access ANSI SCSI revision: 05
|
|
SCSI device sdi: 1953525168 512-byte hdwr sectors (1000205 MB)
|
|
sdi: Write Protect is off
|
|
sdi: Mode Sense: 73 00 00 08
|
|
SCSI device sdi: drive cache: write through
|
|
SCSI device sdi: 1953525168 512-byte hdwr sectors (1000205 MB)
|
|
sdi: Write Protect is off
|
|
sdi: Mode Sense: 73 00 00 08
|
|
SCSI device sdi: drive cache: write through
|
|
sdi: unknown partition table
|
|
sd 1:0:7:0: Attached scsi disk sdi
|
|
Vendor: ATA Model: HITACHI HUA7210S Rev: A90A
|
|
Type: Direct-Access ANSI SCSI revision: 05
|
|
SCSI device sdj: 1953525168 512-byte hdwr sectors (1000205 MB)
|
|
sdj: Write Protect is off
|
|
sdj: Mode Sense: 73 00 00 08
|
|
SCSI device sdj: drive cache: write through
|
|
SCSI device sdj: 1953525168 512-byte hdwr sectors (1000205 MB)
|
|
sdj: Write Protect is off
|
|
sdj: Mode Sense: 73 00 00 08
|
|
SCSI device sdj: drive cache: write through
|
|
sdj: unknown partition table
|
|
sd 1:0:8:0: Attached scsi disk sdj
|
|
Vendor: ATA Model: HITACHI HUA7210S Rev: A90A
|
|
Type: Direct-Access ANSI SCSI revision: 05
|
|
SCSI device sdk: 1953525168 512-byte hdwr sectors (1000205 MB)
|
|
sdk: Write Protect is off
|
|
sdk: Mode Sense: 73 00 00 08
|
|
SCSI device sdk: drive cache: write through
|
|
SCSI device sdk: 1953525168 512-byte hdwr sectors (1000205 MB)
|
|
sdk: Write Protect is off
|
|
sdk: Mode Sense: 73 00 00 08
|
|
SCSI device sdk: drive cache: write through
|
|
sdk: unknown partition table
|
|
sd 1:0:9:0: Attached scsi disk sdk
|
|
Vendor: ATA Model: HITACHI HUA7210S Rev: A90A
|
|
Type: Direct-Access ANSI SCSI revision: 05
|
|
SCSI device sdl: 1953525168 512-byte hdwr sectors (1000205 MB)
|
|
sdl: Write Protect is off
|
|
sdl: Mode Sense: 73 00 00 08
|
|
SCSI device sdl: drive cache: write through
|
|
SCSI device sdl: 1953525168 512-byte hdwr sectors (1000205 MB)
|
|
sdl: Write Protect is off
|
|
sdl: Mode Sense: 73 00 00 08
|
|
SCSI device sdl: drive cache: write through
|
|
sdl: unknown partition table
|
|
sd 1:0:10:0: Attached scsi disk sdl
|
|
Vendor: ATA Model: HITACHI HUA7210S Rev: A90A
|
|
Type: Direct-Access ANSI SCSI revision: 05
|
|
SCSI device sdm: 1953525168 512-byte hdwr sectors (1000205 MB)
|
|
sdm: Write Protect is off
|
|
sdm: Mode Sense: 73 00 00 08
|
|
SCSI device sdm: drive cache: write through
|
|
SCSI device sdm: 1953525168 512-byte hdwr sectors (1000205 MB)
|
|
sdm: Write Protect is off
|
|
sdm: Mode Sense: 73 00 00 08
|
|
SCSI device sdm: drive cache: write through
|
|
sdm: sdm1
|
|
sd 1:0:11:0: Attached scsi disk sdm
|
|
Vendor: SUN Model: Storage J4200 Rev: 3A31
|
|
Type: Enclosure ANSI SCSI revision: 05
|
|
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
|
|
libata version 3.00 loaded.
|
|
ahci 0000:00:1f.2: version 3.0
|
|
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 58
|
|
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
|
|
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems
|
|
PCI: Setting latency timer of device 0000:00:1f.2 to 64
|
|
scsi2 : ahci
|
|
scsi3 : ahci
|
|
scsi4 : ahci
|
|
scsi5 : ahci
|
|
scsi6 : ahci
|
|
scsi7 : ahci
|
|
ata1: SATA max UDMA/133 abar m2048@0xfa5d8000 port 0xfa5d8100 irq 82
|
|
ata2: SATA max UDMA/133 abar m2048@0xfa5d8000 port 0xfa5d8180 irq 82
|
|
ata3: SATA max UDMA/133 abar m2048@0xfa5d8000 port 0xfa5d8200 irq 82
|
|
ata4: SATA max UDMA/133 abar m2048@0xfa5d8000 port 0xfa5d8280 irq 82
|
|
ata5: SATA max UDMA/133 abar m2048@0xfa5d8000 port 0xfa5d8300 irq 82
|
|
ata6: SATA max UDMA/133 abar m2048@0xfa5d8000 port 0xfa5d8380 irq 82
|
|
ata1: SATA link down (SStatus 0 SControl 300)
|
|
ata2: SATA link down (SStatus 0 SControl 300)
|
|
ata3: SATA link down (SStatus 0 SControl 300)
|
|
ata4: SATA link down (SStatus 0 SControl 300)
|
|
ata5: SATA link down (SStatus 0 SControl 300)
|
|
ata6: SATA link down (SStatus 0 SControl 300)
|
|
device-mapper: uevent: version 1.0.3
|
|
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
|
|
device-mapper: dm-raid45: initialized v0.2594l
|
|
EXT3-fs: INFO: recovery required on readonly filesystem.
|
|
EXT3-fs: write access will be enabled during recovery.
|
|
kjournald starting. Commit interval 5 seconds
|
|
EXT3-fs: dm-1: orphan cleanup on readonly fs
|
|
ext3_orphan_cleanup: deleting unreferenced inode 56295427
|
|
ext3_orphan_cleanup: deleting unreferenced inode 96010261
|
|
ext3_orphan_cleanup: deleting unreferenced inode 96010260
|
|
ext3_orphan_cleanup: deleting unreferenced inode 96010259
|
|
ext3_orphan_cleanup: deleting unreferenced inode 96010258
|
|
ext3_orphan_cleanup: deleting unreferenced inode 96010255
|
|
ext3_orphan_cleanup: deleting unreferenced inode 55967827
|
|
ext3_orphan_cleanup: deleting unreferenced inode 13009800
|
|
ext3_orphan_cleanup: deleting unreferenced inode 13009008
|
|
ext3_orphan_cleanup: deleting unreferenced inode 13009117
|
|
ext3_orphan_cleanup: deleting unreferenced inode 13009006
|
|
ext3_orphan_cleanup: deleting unreferenced inode 13009797
|
|
ext3_orphan_cleanup: deleting unreferenced inode 13008965
|
|
ext3_orphan_cleanup: deleting unreferenced inode 13009009
|
|
EXT3-fs: dm-1: 14 orphan inodes deleted
|
|
EXT3-fs: recovery complete.
|
|
EXT3-fs: mounted filesystem with ordered data mode.
|
|
SELinux: Disabled at runtime.
|
|
SELinux: Unregistering netfilter hooks
|
|
type=1404 audit(1260474362.120:2): selinux=0 auid=4294967295 ses=4294967295
|
|
scsi 0:0:1:0: Attached scsi generic sg0 type 0
|
|
scsi 0:0:2:0: Attached scsi generic sg1 type 0
|
|
scsi 0:0:3:0: Attached scsi generic sg2 type 0
|
|
sd 0:1:0:0: Attached scsi generic sg3 type 0
|
|
sd 1:0:0:0: Attached scsi generic sg4 type 0
|
|
sd 1:0:1:0: Attached scsi generic sg5 type 0
|
|
sd 1:0:2:0: Attached scsi generic sg6 type 0
|
|
sd 1:0:3:0: Attached scsi generic sg7 type 0
|
|
sd 1:0:4:0: Attached scsi generic sg8 type 0
|
|
sd 1:0:5:0: Attached scsi generic sg9 type 0
|
|
sd 1:0:6:0: Attached scsi generic sg10 type 0
|
|
sd 1:0:7:0: Attached scsi generic sg11 type 0
|
|
sd 1:0:8:0: Attached scsi generic sg12 type 0
|
|
sd 1:0:9:0: Attached scsi generic sg13 type 0
|
|
sd 1:0:10:0: Attached scsi generic sg14 type 0
|
|
sd 1:0:11:0: Attached scsi generic sg15 type 0
|
|
scsi 1:0:12:0: Attached scsi generic sg16 type 13
|
|
input: PC Speaker as /class/input/input2
|
|
ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 217
|
|
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
|
|
All bugs added by David S. Miller <davem@redhat.com>
|
|
Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2
|
|
Copyright (c) 2007-2009 Intel Corporation.
|
|
GSI 23 sharing vector 0x5A and IRQ 23
|
|
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 28 (level, low) -> IRQ 90
|
|
igb 0000:01:00.0: Disabling ASPM L0s upstream switch port 0000:00:01.0
|
|
PCI: Setting latency timer of device 0000:01:00.0 to 64
|
|
igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
|
|
igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x2) 00:14:4f:ca:fa:b4
|
|
igb 0000:01:00.0: eth0: PBA No: 2030ff-0ff
|
|
igb 0000:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 1 tx queue(s)
|
|
GSI 24 sharing vector 0x92 and IRQ 24
|
|
ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 40 (level, low) -> IRQ 146
|
|
igb 0000:01:00.1: Disabling ASPM L0s upstream switch port 0000:00:01.0
|
|
PCI: Setting latency timer of device 0000:01:00.1 to 64
|
|
igb 0000:01:00.1: Intel(R) Gigabit Ethernet Network Connection
|
|
igb 0000:01:00.1: eth1: (PCIe:2.5Gb/s:Width x2) 00:14:4f:ca:fa:b5
|
|
igb 0000:01:00.1: eth1: PBA No: 2030ff-0ff
|
|
igb 0000:01:00.1: Using MSI-X interrupts. 4 rx queue(s), 1 tx queue(s)
|
|
GSI 25 sharing vector 0xCA and IRQ 25
|
|
ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 29 (level, low) -> IRQ 202
|
|
igb 0000:07:00.0: Disabling ASPM L0s upstream switch port 0000:00:02.0
|
|
PCI: Setting latency timer of device 0000:07:00.0 to 64
|
|
igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection
|
|
igb 0000:07:00.0: eth2: (PCIe:2.5Gb/s:Width x2) 00:14:4f:ca:fa:b6
|
|
igb 0000:07:00.0: eth2: PBA No: 2030ff-0ff
|
|
igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 1 tx queue(s)
|
|
GSI 26 sharing vector 0x43 and IRQ 26
|
|
ACPI: PCI Interrupt 0000:07:00.1[B] -> GSI 41 (level, low) -> IRQ 67
|
|
igb 0000:07:00.1: Disabling ASPM L0s upstream switch port 0000:00:02.0
|
|
PCI: Setting latency timer of device 0000:07:00.1 to 64
|
|
igb 0000:07:00.1: Intel(R) Gigabit Ethernet Network Connection
|
|
igb 0000:07:00.1: eth3: (PCIe:2.5Gb/s:Width x2) 00:14:4f:ca:fa:b7
|
|
igb 0000:07:00.1: eth3: PBA No: 2030ff-0ff
|
|
igb 0000:07:00.1: Using MSI-X interrupts. 4 rx queue(s), 1 tx queue(s)
|
|
floppy0: no floppy controllers found
|
|
lp: driver loaded but no devices found
|
|
NET: Registered protocol family 10
|
|
lo: Disabled Privacy Extensions
|
|
IPv6 over IPv4 tunneling driver
|
|
mtrr: type mismatch for fb000000,800000 old: write-back new: write-combining
|
|
ACPI: Power Button (FF) [PWRF]
|
|
ACPI: Power Button (CM) [PWRB]
|
|
md: Autodetecting RAID arrays.
|
|
md: autorun ...
|
|
md: ... autorun DONE.
|
|
device-mapper: multipath: version 1.0.5 loaded
|
|
EXT3 FS on dm-1, internal journal
|
|
kjournald starting. Commit interval 5 seconds
|
|
EXT3 FS on sda1, internal journal
|
|
EXT3-fs: mounted filesystem with ordered data mode.
|
|
Adding 10190840k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:10190840k
|