# arcconf getconfig 1
Controllers found: 1
----------------------------------------------------------------------
Controller information
----------------------------------------------------------------------
   Controller Status : Optimal
   Channel description : SAS/SATA
   Controller Model : Adaptec 5805Z
   Controller Serial Number : 0A11115148F
   Physical Slot : 2
   Temperature : 68 C/ 154 F (Normal)
   Installed memory : 512 MB
   Copyback : Disabled
   Background consistency check : Disabled
   Automatic Failover : Enabled
   Global task priority : High
   Performance Mode : Default/Dynamic
   Stayawake period : Disabled
   Spinup limit internal drives : 0
   Spinup limit external drives : 0
   Defunct disk drive count : 0
   Logical devices/Failed/Degraded : 2/0/0
   SSDs assigned to MaxIQ Cache pool : 0
   Maximum SSDs allowed in MaxIQ Cache pool : 8
   MaxIQ Read Cache Pool Size : 0.000 GB
   MaxIQ cache fetch rate : 0
   MaxIQ Cache Read, Write Balance Factor : 3,1
   NCQ status : Enabled
   Statistics data collection mode : Enabled
   --------------------------------------------------------

   --------------------------------------------------------
   Controller Version Information
   --------------------------------------------------------
   BIOS : 5.2-0 (18252)
   Firmware : 5.2-0 (18252)
   Driver : 1.1-7 (28000)
   Boot Flash : 5.2-0 (18252)
   --------------------------------------------------------
   Controller ZMM Information
   --------------------------------------------------------
   Status : ZMM Optimal

----------------------------------------------------------------------
Logical device information
----------------------------------------------------------------------
Logical device number 0
   Logical device name : RAID10-A
   RAID level : 10
   Status of logical device : Optimal
   Size : 121790 MB
   Stripe-unit size : 256 KB
   Read-cache mode : Enabled
   MaxIQ preferred cache setting : Enabled
   MaxIQ cache setting : Disabled
   Write-cache mode : Enabled (write-back)
   Write-cache setting : Enabled (write-back) when protected by battery/ZMM
   Partitioned : Yes
   Protected by Hot-Spare : No
   Bootable : Yes
   Failed stripes : No
   Power settings : Disabled
   --------------------------------------------------------
   Logical device segment information
   --------------------------------------------------------
   Group 0, Segment 0 : Present (0,0) CVEM939500TN064KGN
   Group 0, Segment 1 : Present (0,1) CVEM940200NT064KGN
   Group 1, Segment 0 : Present (0,2) CVEM004300A4064KGN
   Group 1, Segment 1 : Present (0,3) CVEM9214000F064KGN

Logical device number 1
   Logical device name : RAID1-A
   RAID level : 1
   Status of logical device : Optimal
   Size : 285686 MB
   Read-cache mode : Enabled
   MaxIQ preferred cache setting : Enabled
   MaxIQ cache setting : Disabled
   Write-cache mode : Enabled (write-back)
   Write-cache setting : Enabled (write-back) when protected by battery/ZMM
   Partitioned : Yes
   Protected by Hot-Spare : No
   Bootable : No
   Failed stripes : No
   Power settings : Disabled
   --------------------------------------------------------
   Logical device segment information
   --------------------------------------------------------
   Segment 0 : Present (0,4) 6SJ1CG1A0000N1407G9E
   Segment 1 : Present (0,5) 6SJ1F1XW0000N1407EXC

----------------------------------------------------------------------
Physical Device information
----------------------------------------------------------------------
      Device #0
         Device is a Hard drive
         State : Online
         Supported : Yes
         Transfer Speed : SATA 3.0 Gb/s
         Reported Channel,Device(T:L) : 0,0(0:0)
         Reported Location : Connector 0, Device 0
         Vendor : INTEL
         Model : SSDSA2SH064G1GC
         Firmware : 045C8790
         Serial number : CVEM939500TN064KGN
         Size : 61057 MB
         Write Cache : Enabled (write-back)
         FRU : None
         S.M.A.R.T. : No
         S.M.A.R.T. warnings : 0
         Power State : Full rpm
         Supported Power States : Full rpm,Powered off
         SSD : Yes
         MaxIQ Cache Capable : No
         MaxIQ Cache Assigned : No
         NCQ status : Enabled
      Device #1
         Device is a Hard drive
         State : Online
         Supported : Yes
         Transfer Speed : SATA 3.0 Gb/s
         Reported Channel,Device(T:L) : 0,1(1:0)
         Reported Location : Connector 0, Device 1
         Vendor : INTEL
         Model : SSDSA2SH064G1GC
         Firmware : 045C8860
         Serial number : CVEM940200NT064KGN
         Size : 61057 MB
         Write Cache : Enabled (write-back)
         FRU : None
         S.M.A.R.T. : No
         S.M.A.R.T. warnings : 0
         Power State : Full rpm
         Supported Power States : Full rpm,Powered off
         SSD : Yes
         MaxIQ Cache Capable : No
         MaxIQ Cache Assigned : No
         NCQ status : Enabled
      Device #2
         Device is a Hard drive
         State : Online
         Supported : Yes
         Transfer Speed : SATA 3.0 Gb/s
         Reported Channel,Device(T:L) : 0,2(2:0)
         Reported Location : Connector 0, Device 2
         Vendor : INTEL
         Model : SSDSA2SH064G1GC
         Firmware : 045C8860
         Serial number : CVEM004300A4064KGN
         Size : 61057 MB
         Write Cache : Enabled (write-back)
         FRU : None
         S.M.A.R.T. : No
         S.M.A.R.T. warnings : 0
         Power State : Full rpm
         Supported Power States : Full rpm,Powered off
         SSD : Yes
         MaxIQ Cache Capable : No
         MaxIQ Cache Assigned : No
         NCQ status : Enabled
      Device #3
         Device is a Hard drive
         State : Online
         Supported : Yes
         Transfer Speed : SATA 3.0 Gb/s
         Reported Channel,Device(T:L) : 0,3(3:0)
         Reported Location : Connector 0, Device 3
         Vendor : INTEL
         Model : SSDSA2SH064G1GC
         Firmware : 045C8860
         Serial number : CVEM9214000F064KGN
         Size : 61057 MB
         Write Cache : Enabled (write-back)
         FRU : None
         S.M.A.R.T. : No
         S.M.A.R.T. warnings : 0
         Power State : Full rpm
         Supported Power States : Full rpm,Powered off
         SSD : Yes
         MaxIQ Cache Capable : No
         MaxIQ Cache Assigned : No
         NCQ status : Enabled
      Device #4
         Device is a Hard drive
         State : Online
         Supported : Yes
         Transfer Speed : SAS 3.0 Gb/s
         Reported Channel,Device(T:L) : 0,4(4:0)
         Reported Location : Connector 1, Device 0
         Vendor : SEAGATE
         Model : ST3300657SS
         Firmware : 0008
         Serial number : 6SJ1CG1A0000N1407G9E
         World-wide name : 5000C50039EE5900
         Size : 286102 MB
         Write Cache : Enabled (write-back)
         FRU : None
         S.M.A.R.T. : No
         S.M.A.R.T. warnings : 0
         Power State : Full rpm
         Supported Power States : Full rpm,Powered off
         SSD : No
         MaxIQ Cache Capable : No
         MaxIQ Cache Assigned : No
      Device #5
         Device is a Hard drive
         State : Online
         Supported : Yes
         Transfer Speed : SAS 3.0 Gb/s
         Reported Channel,Device(T:L) : 0,5(5:0)
         Reported Location : Connector 1, Device 1
         Vendor : SEAGATE
         Model : ST3300657SS
         Firmware : 0008
         Serial number : 6SJ1F1XW0000N1407EXC
         World-wide name : 5000C50039EE6A38
         Size : 286102 MB
         Write Cache : Enabled (write-back)
         FRU : None
         S.M.A.R.T. : No
         S.M.A.R.T. warnings : 0
         Power State : Full rpm
         Supported Power States : Full rpm,Powered off
         SSD : No
         MaxIQ Cache Capable : No
         MaxIQ Cache Assigned : No

Command completed successfully.