Bootdata ok (command line is auto BOOT_IMAGE=linux ro root=801 devfs=nomount) Linux version 2.6.18-6-amd64 (Debian 2.6.18.dfsg.1-24etch4) (dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Fri Aug 21 14:53:35 UTC 2009 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 000000007ffc0000 (usable) BIOS-e820: 000000007ffc0000 - 000000007ffcfc00 (ACPI data) BIOS-e820: 000000007ffcfc00 - 000000007ffff000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec90000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) DMI 2.3 present. ACPI: RSDP (v000 DELL ) @ 0x00000000000fd5b0 ACPI: RSDT (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd5c4 ACPI: FADT (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd620 ACPI: MADT (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd694 ACPI: SPCR (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd774 ACPI: HPET (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd7c4 ACPI: MCFG (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd7fc ACPI: DSDT (v001 DELL PE BKC 0x00000001 MSFT 0x0100000e) @ 0x0000000000000000 No NUMA configuration found Faking a node at 0000000000000000-000000007ffc0000 Bootmem setup node 0 0000000000000000-000000007ffc0000 On node 0 totalpages: 514854 DMA zone: 1837 pages, LIFO batch:0 DMA32 zone: 513017 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) Processor #6 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) Processor #1 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled) Processor #7 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x05] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x04] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x05] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[32]) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 32-55 ACPI: IOAPIC (id[0x0a] address[0xfec83000] gsi_base[64]) IOAPIC[2]: apic_id 10, version 32, address 0xfec83000, GSI 64-87 ACPI: IOAPIC (id[0x0b] address[0xfec84000] gsi_base[96]) IOAPIC[3]: apic_id 11, version 32, address 0xfec84000, GSI 96-119 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to physical flat ACPI: HPET id: 0xffffffff base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 80000000 (gap: 7ffff000:60001000) SMP: Allowing 8 CPUs, 4 hotplug CPUs Built 1 zonelists. Total pages: 514854 Kernel command line: auto BOOT_IMAGE=linux ro root=801 devfs=nomount Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer. time.c: Detected 2793.261 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... Memory: 2055964k/2096896k available (1929k kernel code, 40548k reserved, 870k data, 176k init) Calibrating delay using timer specific routine.. 5591.55 BogoMIPS (lpj=11183106) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 256 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM1) SMP alternatives: switching to UP code ACPI: Core revision 20060707 Using local APIC timer interrupts. result 12469837 Detected 12.469 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/4 APIC 0x6 Initializing CPU#1 Calibrating delay using timer specific routine.. 5586.56 BogoMIPS (lpj=11173139) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 3 CPU: Processor Core ID: 0 CPU1: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 2.80GHz stepping 0a SMP alternatives: switching to SMP code Booting processor 2/4 APIC 0x1 Initializing CPU#2 Calibrating delay using timer specific routine.. 5586.34 BogoMIPS (lpj=11172698) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU2: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 2.80GHz stepping 0a SMP alternatives: switching to SMP code Booting processor 3/4 APIC 0x7 Initializing CPU#3 Calibrating delay using timer specific routine.. 5586.59 BogoMIPS (lpj=11173195) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 3 CPU: Processor Core ID: 0 CPU3: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 2.80GHz stepping 0a Brought up 4 CPUs testing NMI watchdog ... OK. migration_cost=10,1700 checking if image is initramfs... it is Freeing initrd memory: 4882k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG at e0000000 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 0880-08bf claimed by ICH4 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: PXH quirk detected, disabling MSI for SHPC device PCI: PXH quirk detected, disabling MSI for SHPC device PCI: PXH quirk detected, disabling MSI for SHPC device PCI: PXH quirk detected, disabling MSI for SHPC device Boot video device is 0000:0b:0d.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PALO._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PALO.DOBA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PALO.DOBB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBLO._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBHI._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBHI.PXB1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBHI.PXB2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.VPR1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.VPR1.PXC1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.VPR1.PXC2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PICH._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: ACPI device : hid PNP0A03 pnp: ACPI device : hid PNP0200 pnp: ACPI device : hid PNP0C04 pnp: ACPI device : hid PNP0800 pnp: ACPI device : hid PNP0B00 pnp: ACPI device : hid PNP0700 pnp: ACPI device : hid PNP0501 pnp: ACPI device : hid PNP0C01 pnp: ACPI device : hid IPI0001 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0103 pnp: PnP ACPI: found 11 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz PCI-GART: No AMD northbridge found. pnp: the driver 'system' has been registered pnp: match found with the PnP device '00:07' and the driver 'system' pnp: 00:07: ioport range 0x800-0x87f could not be reserved pnp: 00:07: ioport range 0x880-0x8bf has been reserved pnp: 00:07: ioport range 0x8c0-0x8df has been reserved pnp: 00:07: ioport range 0x8e0-0x8e3 has been reserved pnp: 00:07: ioport range 0xc00-0xc0f has been reserved pnp: 00:07: ioport range 0xc10-0xc1f has been reserved pnp: 00:07: ioport range 0xca0-0xca7 has been reserved pnp: 00:07: ioport range 0xca9-0xcab has been reserved pnp: match found with the PnP device '00:09' and the driver 'system' PCI: Bridge: 0000:01:00.0 IO window: disabled. MEM window: fe900000-feafffff PREFETCH window: f8000000-f80fffff PCI: Bridge: 0000:01:00.2 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:02.0 IO window: disabled. MEM window: fe800000-feafffff PREFETCH window: f8000000-f80fffff PCI: Bridge: 0000:00:04.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:05:00.0 IO window: e000-efff MEM window: fe600000-fe7fffff PREFETCH window: disabled. PCI: Bridge: 0000:05:00.2 IO window: d000-dfff MEM window: fe400000-fe5fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:05.0 IO window: d000-efff MEM window: fe300000-fe7fffff PREFETCH window: disabled. PCI: Bridge: 0000:08:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:08:00.2 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: fe200000-fe2fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: c000-cfff MEM window: fe000000-fe1fffff PREFETCH window: f0000000-f7ffffff GSI 16 sharing vector 0xA9 and IRQ 16 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:01:00.0 to 64 PCI: Setting latency timer of device 0000:01:00.2 to 64 ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:04.0 to 64 ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:05.0 to 64 PCI: Setting latency timer of device 0000:05:00.0 to 64 PCI: Setting latency timer of device 0000:05:00.2 to 64 ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:06.0 to 64 PCI: Setting latency timer of device 0000:08:00.0 to 64 PCI: Setting latency timer of device 0000:08:00.2 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1255917390.556:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Intel E7520/7320/7525 detected.<7>PCI: Setting latency timer of device 0000:00:02.0 to 64 Allocate Port Service[0000:00:02.0:pcie00] Allocate Port Service[0000:00:02.0:pcie01] PCI: Setting latency timer of device 0000:00:04.0 to 64 Allocate Port Service[0000:00:04.0:pcie00] Allocate Port Service[0000:00:04.0:pcie01] PCI: Setting latency timer of device 0000:00:05.0 to 64 Allocate Port Service[0000:00:05.0:pcie00] Allocate Port Service[0000:00:05.0:pcie01] PCI: Setting latency timer of device 0000:00:06.0 to 64 Allocate Port Service[0000:00:06.0:pcie00] Allocate Port Service[0000:00:06.0:pcie01] Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A pnp: the driver 'serial' has been registered pnp: match found with the PnP device '00:06' and the driver 'serial' 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize pnp: the driver 'i8042 kbd' has been registered pnp: the driver 'i8042 aux' has been registered pnp: the driver 'i8042 kbd' has been unregistered pnp: the driver 'i8042 aux' has been unregistered PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 ACPI: (supports S0 S4 S5) Freeing unused kernel memory: 176k freed ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x5 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x6 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x7 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x8 USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 169, io base 0x0000bce0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Intel(R) PRO/1000 Network Driver - version 7.1.9-k4-NAPI Copyright (c) 1999-2006 Intel Corporation. megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) SCSI subsystem initialized megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006) GSI 17 sharing vector 0xB1 and IRQ 17 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 177, io base 0x0000bcc0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected GSI 18 sharing vector 0xB9 and IRQ 18 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 185, io base 0x0000bca0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected megaraid: probe new device 0x1028:0x0013:0x1028:0x016d: bus 2:slot 14:func 0 GSI 19 sharing vector 0xC1 and IRQ 19 GSI 20 sharing vector 0xC9 and IRQ 20 ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 46 (level, low) -> IRQ 201 ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 193, io mem 0xfeb00000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected megaraid: fw version:[5B2D] bios version:[H435] scsi0 : LSI Logic MegaRAID driver scsi[0]: scanning scsi channel 0 [Phy 0] for non-raid devices usb 4-3: new high speed USB device using ehci_hcd and address 2 usb 4-3: configuration #1 chosen from 1 choice hub 4-3:1.0: USB hub found hub 4-3:1.0: 2 ports detected Vendor: PE/PV Model: 1x6 SCSI BP Rev: 1.0 Type: Processor ANSI SCSI revision: 02 scsi[0]: scanning scsi channel 1 [Phy 1] for non-raid devices scsi[0]: scanning scsi channel 2 [virtual] for logical drives Vendor: MegaRAID Model: LD 0 RAID1 139G Rev: 5B2D Type: Direct-Access ANSI SCSI revision: 02 GSI 21 sharing vector 0xD1 and IRQ 21 ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 64 (level, low) -> IRQ 209 ICH5: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: Unable to derive IRQ for device 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A]: no GSI ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... SCSI device sda: 286228480 512-byte hdwr sectors (146549 MB) sda: Write Protect is off sda: Mode Sense: 00 00 00 00 sda: asking for cache data failed sda: assuming drive cache: write through SCSI device sda: 286228480 512-byte hdwr sectors (146549 MB) sda: Write Protect is off sda: Mode Sense: 00 00 00 00 sda: asking for cache data failed sda: assuming drive cache: write through sda: sda1 sda2 sda3 sda4 <<6>e1000: 0000:06:07.0: e1000_probe: (PCI:66MHz:32-bit) 00:13:72:5b:fb:1a sda5 sda6 > sd 0:2:0:0: Attached scsi disk sda e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection GSI 22 sharing vector 0xD9 and IRQ 22 ACPI: PCI Interrupt 0000:07:08.0[A] -> GSI 65 (level, low) -> IRQ 217 e1000: 0000:07:08.0: e1000_probe: (PCI:66MHz:32-bit) 00:13:72:5b:fb:1b e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection hda: TEAC CD-ROM CD-224E-N, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hda: ATAPI 24X CD-ROM drive, 256kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 Probing IDE interface ide1... Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. input: PC Speaker as /class/input/input0 scsi 0:0:6:0: Attached scsi generic sg0 type 3 sd 0:2:0:0: Attached scsi generic sg1 type 0 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 FDC 0 is a National Semiconductor PC87306 intel_rng: FWH not detected EDAC MC: Ver: 2.0.1 Aug 21 2009 Contact your BIOS vendor to see if the E752x error registers can be safely un-hidden e752x_edac: probe of 0000:00:00.0 failed with error -12 Adding 8393952k swap on /dev/sda2. Priority:-1 extents:1 across:8393952k EXT3 FS on sda1, internal journal ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack usbcore: registered new driver usbkbd drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem XFS mounting filesystem sda5 Ending clean XFS mount for filesystem: sda5 XFS mounting filesystem sda6 Ending clean XFS mount for filesystem: sda6 XFS mounting filesystem sda3 Ending clean XFS mount for filesystem: sda3 e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex ipmi message handler version 39.0 IPMI System Interface driver. ipmi_si: Trying SMBIOS-specified KCS state machine at I/O address 0xca8, slave address 0x20, irq 0 ipmi: Found new BMC (man_id: 0x0002a2, prod_id: 0x0000, dev_id: 0x20) IPMI KCS interface initialized ipmi device interface NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present IN= OUT=eth0 SRC=66.111.107.38 DST=66.111.107.37 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=50848 DF PROTO=TCP SPT=60847 DPT=202 WINDOW=5840 RES=0x00 SYN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=66.111.107.37 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=50849 DF PROTO=TCP SPT=60847 DPT=202 WINDOW=5840 RES=0x00 SYN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=66.111.107.37 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=34985 DF PROTO=TCP SPT=50624 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=66.111.107.37 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=34986 DF PROTO=TCP SPT=50624 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=66.111.107.37 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=11280 DF PROTO=TCP SPT=34243 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=85.105.10.43 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=36784 DF PROTO=TCP SPT=80 DPT=1181 WINDOW=6432 RES=0x00 ACK FIN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=85.105.10.43 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=36785 DF PROTO=TCP SPT=80 DPT=1181 WINDOW=6432 RES=0x00 ACK FIN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=66.111.107.37 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=13520 DF PROTO=TCP SPT=41849 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=66.111.107.37 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=13521 DF PROTO=TCP SPT=41849 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=69.199.23.2 LEN=40 TOS=0x08 PREC=0x00 TTL=64 ID=12813 DF PROTO=TCP SPT=3306 DPT=15745 WINDOW=9648 RES=0x00 ACK FIN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=66.111.107.37 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=17333 DF PROTO=TCP SPT=42547 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=66.111.107.37 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=17334 DF PROTO=TCP SPT=42547 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=66.111.107.37 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=17502 DF PROTO=TCP SPT=39168 DPT=202 WINDOW=5840 RES=0x00 SYN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=208.124.56.241 LEN=40 TOS=0x08 PREC=0x00 TTL=64 ID=8236 DF PROTO=TCP SPT=3306 DPT=55343 WINDOW=54 RES=0x00 ACK FIN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=66.111.107.37 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=52941 DF PROTO=TCP SPT=47624 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=66.111.107.37 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=52942 DF PROTO=TCP SPT=47624 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=66.111.107.37 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=23294 DF PROTO=TCP SPT=47625 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=66.111.107.37 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14752 DF PROTO=TCP SPT=47626 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=66.111.107.37 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14753 DF PROTO=TCP SPT=47626 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=66.111.107.37 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=50824 DF PROTO=TCP SPT=47627 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=66.111.107.37 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=50825 DF PROTO=TCP SPT=47627 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=64.120.149.53 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=3135 DF PROTO=TCP SPT=80 DPT=34832 WINDOW=54 RES=0x00 ACK FIN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=64.120.149.53 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=17966 DF PROTO=TCP SPT=80 DPT=36566 WINDOW=54 RES=0x00 ACK FIN URGP=0 percona@db2:/var/lib/mysql$ dmiesesg | less [?1049h[?1h=Bootdata ok (command line is auto BOOT_IMAGE=linux ro root=801 devfs=nomount) Linux version 2.6.18-6-amd64 (Debian 2.6.18.dfsg.1-24etch4) (dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Fri Aug 21 14:53:35 UTC 2009 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 000000007ffc0000 (usable) BIOS-e820: 000000007ffc0000 - 000000007ffcfc00 (ACPI data) BIOS-e820: 000000007ffcfc00 - 000000007ffff000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec90000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) DMI 2.3 present. ACPI: RSDP (v000 DELL ) @ 0x00000000000fd5b0 ACPI: RSDT (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd5c4 ACPI: FADT (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd620 ACPI: MADT (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd694 ACPI: SPCR (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd774 ACPI: HPET (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd7c4 ACPI: MCFG (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd7fc ACPI: DSDT (v001 DELL PE BKC 0x00000001 MSFT 0x0100000e) @ 0x0000000000000000 No NUMA configuration found Faking a node at 0000000000000000-000000007ffc0000 Bootmem setup node 0 0000000000000000-000000007ffc0000 On node 0 totalpages: 514854 DMA zone: 1837 pages, LIFO batch:0 DMA32 zone: 513017 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) Processor #6 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) Processor #1 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled) Processor #7 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x05] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x04] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x05] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[32]) :/rraaiiddBootdata ok (command line is auto BOOT_IMAGE=linux ro root=801 devfs=nomount) Linux version 2.6.18-6-amd64 (Debian 2.6.18.dfsg.1-24etch4) (dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Fri Aug 21 14:53:35 UTC 2009 BIOS-provided physical RAM map:  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)  BIOS-e820: 0000000000100000 - 000000007ffc0000 (usable)  BIOS-e820: 000000007ffc0000 - 000000007ffcfc00 (ACPI data)  BIOS-e820: 000000007ffcfc00 - 000000007ffff000 (reserved)  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)  BIOS-e820: 00000000fec00000 - 00000000fec90000 (reserved)  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)  BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) DMI 2.3 present. ACPI: RSDP (v000 DELL ) @ 0x00000000000fd5b0 ACPI: RSDT (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd5c4 ACPI: FADT (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd620 ACPI: MADT (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd694 ACPI: SPCR (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd774 ACPI: HPET (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd7c4 ACPI: MCFG (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd7fc ACPI: DSDT (v001 DELL PE BKC 0x00000001 MSFT 0x0100000e) @ 0x0000000000000000 No NUMA configuration found Faking a node at 0000000000000000-000000007ffc0000 Bootmem setup node 0 0000000000000000-000000007ffc0000 On node 0 totalpages: 514854  DMA zone: 1837 pages, LIFO batch:0  DMA32 zone: 513017 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) Processor #6 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) Processor #1 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled) Processor #7 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x05] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x04] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x05] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[32]) Bootdata ok (command line is auto BOOT_IMAGE=linux ro root=801 devfs=nomount) Linux version 2.6.18-6-amd64 (Debian 2.6.18.dfsg.1-24etch4) (dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Fri Aug 21 14:53:35 UTC 2009 BIOS-provided physical RAM map:  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)  BIOS-e820: 0000000000100000 - 000000007ffc0000 (usable)  BIOS-e820: 000000007ffc0000 - 000000007ffcfc00 (ACPI data)  BIOS-e820: 000000007ffcfc00 - 000000007ffff000 (reserved)  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)  BIOS-e820: 00000000fec00000 - 00000000fec90000 (reserved)  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)  BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) DMI 2.3 present. ACPI: RSDP (v000 DELL ) @ 0x00000000000fd5b0 ACPI: RSDT (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd5c4 ACPI: FADT (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd620 ACPI: MADT (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd694 ACPI: SPCR (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd774 ACPI: HPET (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd7c4 ACPI: MCFG (v001 DELL PE BKC 0x00000001 MSFT 0x0100000a) @ 0x00000000000fd7fc ACPI: DSDT (v001 DELL PE BKC 0x00000001 MSFT 0x0100000e) @ 0x0000000000000000 No NUMA configuration found Faking a node at 0000000000000000-000000007ffc0000 Bootmem setup node 0 0000000000000000-000000007ffc0000 On node 0 totalpages: 514854  DMA zone: 1837 pages, LIFO batch:0  DMA32 zone: 513017 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) Processor #6 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) Processor #1 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled) Processor #7 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x05] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x04] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x05] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[32]) ...skipping... megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) SCSI subsystem initialized megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006) GSI 17 sharing vector 0xB1 and IRQ 17 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 177, io base 0x0000bcc0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected GSI 18 sharing vector 0xB9 and IRQ 18 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 185, io base 0x0000bca0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected megaraid: probe new device 0x1028:0x0013:0x1028:0x016d: bus 2:slot 14:func 0 GSI 19 sharing vector 0xC1 and IRQ 19 GSI 20 sharing vector 0xC9 and IRQ 20 ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 46 (level, low) -> IRQ 201 ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 193, io mem 0xfeb00000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected megaraid: fw version:[5B2D] bios version:[H435] scsi0 : LSI Logic MegaRAID driver scsi[0]: scanning scsi channel 0 [Phy 0] for non-raid devices usb 4-3: new high speed USB device using ehci_hcd and address 2 usb 4-3: configuration #1 chosen from 1 choice hub 4-3:1.0: USB hub found hub 4-3:1.0: 2 ports detected Vendor: PE/PV Model: 1x6 SCSI BP Rev: 1.0 Type: Processor ANSI SCSI revision: 02 scsi[0]: scanning scsi channel 1 [Phy 1] for non-raid devices scsi[0]: scanning scsi channel 2 [virtual] for logical drives Vendor: MegaRAID Model: LD 0 RAID1 139G Rev: 5B2D Type: Direct-Access ANSI SCSI revision: 02 GSI 21 sharing vector 0xD1 and IRQ 21 ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 64 (level, low) -> IRQ 209 ICH5: IDE controller at PCI slot 0000:00:1f.1 :PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) :ACPI: Unable to derive IRQ for device 0000:00:1f.1 :ACPI: PCI Interrupt 0000:00:1f.1[A]: no GSI :ICH5: chipset revision 2 :ICH5: not 100% native mode: will probe irqs later : ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio : ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio :Probing IDE interface ide0... :SCSI device sda: 286228480 512-byte hdwr sectors (146549 MB) :sda: Write Protect is off :sda: Mode Sense: 00 00 00 00 :sda: asking for cache data failed :sda: assuming drive cache: write through :SCSI device sda: 286228480 512-byte hdwr sectors (146549 MB) :sda: Write Protect is off :sda: Mode Sense: 00 00 00 00 :sda: asking for cache data failed :sda: assuming drive cache: write through : sda: sda1 sda2 sda3 sda4 <<6>e1000: 0000:06:07.0: e1000_probe: (PCI:66MHz:32-bit) 00:13:72:5b:fb:1a : sda5 sda6 > :sd 0:2:0:0: Attached scsi disk sda :e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection :GSI 22 sharing vector 0xD9 and IRQ 22 :ACPI: PCI Interrupt 0000:07:08.0[A] -> GSI 65 (level, low) -> IRQ 217 :e1000: 0000:07:08.0: e1000_probe: (PCI:66MHz:32-bit) 00:13:72:5b:fb:1b :e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection :hda: TEAC CD-ROM CD-224E-N, ATAPI CD/DVD-ROM drive :ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 :Probing IDE interface ide1... :hda: ATAPI 24X CD-ROM drive, 256kB Cache, UDMA(33) :Uniform CD-ROM driver Revision: 3.20 :Probing IDE interface ide1... Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. input: PC Speaker as /class/input/input0 scsi 0:0:6:0: Attached scsi generic sg0 type 3 sd 0:2:0:0: Attached scsi generic sg1 type 0 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 FDC 0 is a National Semiconductor PC87306 intel_rng: FWH not detected EDAC MC: Ver: 2.0.1 Aug 21 2009 Contact your BIOS vendor to see if the E752x error registers can be safely un-hidden e752x_edac: probe of 0000:00:00.0 failed with error -12 Adding 8393952k swap on /dev/sda2. Priority:-1 extents:1 across:8393952k EXT3 FS on sda1, internal journal ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack usbcore: registered new driver usbkbd drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem XFS mounting filesystem sda5 Ending clean XFS mount for filesystem: sda5 XFS mounting filesystem sda6 Ending clean XFS mount for filesystem: sda6 XFS mounting filesystem sda3 Ending clean XFS mount for filesystem: sda3 e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex ipmi message handler version 39.0 IPMI System Interface driver. ipmi_si: Trying SMBIOS-specified KCS state machine at I/O address 0xca8, slave address 0x20, irq 0 ipmi: Found new BMC (man_id: 0x0002a2, prod_id: 0x0000, dev_id: 0x20) IPMI KCS interface initialized ipmi device interface NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present IN= OUT=eth0 SRC=66.111.107.38 DST=66.111.107.37 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=50848 DF PROTO=TCP SPT=60847 DPT=202 WINDOW=5840 RES=0x00 SYN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=66.111.107.37 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=50849 DF PROTO=TCP SPT=60847 DPT=202 WINDOW=5840 RES=0x00 SYN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=66.111.107.37 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=34985 DF PROTO=TCP SPT=50624 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=66.111.107.37 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=34986 DF PROTO=TCP SPT=50624 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=66.111.107.37 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=11280 DF PROTO=TCP SPT=34243 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=85.105.10.43 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=36784 DF PROTO=TCP SPT=80 DPT=1181 WINDOW=6432 RES=0x00 ACK FIN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=85.105.10.43 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=36785 DF PROTO=TCP SPT=80 DPT=1181 WINDOW=6432 RES=0x00 ACK FIN URGP=0 :IN= OUT=eth0 SRC=66.111.107.38 DST=66.111.107.37 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=13520 DF PROTO=TCP SPT=41849 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=66.111.107.37 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=13521 DF PROTO=TCP SPT=41849 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=69.199.23.2 LEN=40 TOS=0x08 PREC=0x00 TTL=64 ID=12813 DF PROTO=TCP SPT=3306 DPT=15745 WINDOW=9648 RES=0x00 ACK FIN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=66.111.107.37 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=17333 DF PROTO=TCP SPT=42547 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=66.111.107.37 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=17334 DF PROTO=TCP SPT=42547 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=66.111.107.37 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=17502 DF PROTO=TCP SPT=39168 DPT=202 WINDOW=5840 RES=0x00 SYN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=208.124.56.241 LEN=40 TOS=0x08 PREC=0x00 TTL=64 ID=8236 DF PROTO=TCP SPT=3306 DPT=55343 WINDOW=54 RES=0x00 ACK FIN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=66.111.107.37 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=52941 DF PROTO=TCP SPT=47624 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=66.111.107.37 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=52942 DF PROTO=TCP SPT=47624 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=66.111.107.37 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=23294 DF PROTO=TCP SPT=47625 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=66.111.107.37 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14752 DF PROTO=TCP SPT=47626 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=66.111.107.37 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14753 DF PROTO=TCP SPT=47626 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=66.111.107.37 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=50824 DF PROTO=TCP SPT=47627 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=66.111.107.37 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=50825 DF PROTO=TCP SPT=47627 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=64.120.149.53 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=3135 DF PROTO=TCP SPT=80 DPT=34832 WINDOW=54 RES=0x00 ACK FIN URGP=0 IN= OUT=eth0 SRC=66.111.107.38 DST=64.120.149.53 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=17966 DF PROTO=TCP SPT=80 DPT=36566 WINDOW=54 RES=0x00 ACK FIN URGP=0