Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.27.30-170.2.82.fc10.x86_64 (mockbuild@x86-1.fedora.phx.redhat.com) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #1 SMP Mon Aug 17 08:18:34 EDT 2009 Command line: ro root=UUID=7104b60f-eac5-421a-8910-88d75932c822 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 00000000bfb50000 (usable) BIOS-e820: 00000000bfb50000 - 00000000bfb66000 (reserved) BIOS-e820: 00000000bfb66000 - 00000000bfb85c00 (ACPI data) BIOS-e820: 00000000bfb85c00 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000440000000 (usable) DMI 2.5 present. last_pfn = 0x440000 max_arch_pfn = 0x3ffffffff x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 last_pfn = 0xbfb50 max_arch_pfn = 0x3ffffffff init_memory_mapping 0000000000 - 00bfa00000 page 2M 00bfa00000 - 00bfb50000 page 4k kernel direct mapping tables up to bfb50000 @ 8000-d000 last_map_addr: bfb50000 end: bfb50000 init_memory_mapping 0100000000 - 0440000000 page 2M kernel direct mapping tables up to 440000000 @ b000-1d000 last_map_addr: 440000000 end: 440000000 RAMDISK: 37bec000 - 37fef426 ACPI: RSDP 000F2160, 0024 (r2 DELL ) ACPI: XSDT 000F21FC, 0084 (r1 DELL PE_SC3 1 DELL 1) ACPI: FACP BFB83524, 00F4 (r3 DELL PE_SC3 1 DELL 1) ACPI: DSDT BFB66000, 4996 (r1 DELL PE_SC3 1 INTL 20050624) ACPI: FACS BFB85C00, 0040 ACPI: APIC BFB83078, 0092 (r1 DELL PE_SC3 1 DELL 1) ACPI: SPCR BFB83130, 0050 (r1 DELL PE_SC3 1 DELL 1) ACPI: HPET BFB83184, 0038 (r1 DELL PE_SC3 1 DELL 1) ACPI: MCFG BFB831C0, 003C (r1 DELL PE_SC3 1 DELL 1) ACPI: WD__ BFB83200, 0134 (r1 DELL PE_SC3 1 DELL 1) ACPI: SLIC BFB83338, 0176 (r1 DELL PE_SC3 1 DELL 1) ACPI: ERST BFB6AB18, 0210 (r1 DELL PE_SC3 1 DELL 1) ACPI: HEST BFB6AD28, 027C (r1 DELL PE_SC3 1 DELL 1) ACPI: BERT BFB6A998, 0030 (r1 DELL PE_SC3 1 DELL 1) ACPI: EINJ BFB6A9C8, 0150 (r1 DELL PE_SC3 1 DELL 1) ACPI: TCPA BFB834BC, 0064 (r1 DELL PE_SC3 1 DELL 1) No NUMA configuration found Faking a node at 0000000000000000-0000000440000000 Bootmem setup node 0 0000000000000000-0000000440000000 NODE_DATA [0000000000018000 - 000000000002cfff] bootmap [0000000000100000 - 0000000000187fff] pages 88 (7 early reservations) ==> bootmem [0000000000 - 0440000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 0000a310cc] TEXT DATA BSS ==> [0000200000 - 0000a310cc] #3 [0037bec000 - 0037fef426] RAMDISK ==> [0037bec000 - 0037fef426] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] #5 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] #6 [000000b000 - 0000018000] PGTABLE ==> [000000b000 - 0000018000] found SMP MP-table at [ffff8800000fe710] 000fe710 [ffffe20000000000-ffffe2000edfffff] PMD -> [ffff880028200000-ffff8800361fffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00440000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x000000a0 0: 0x00000100 -> 0x000bfb50 0: 0x00100000 -> 0x00440000 On node 0 totalpages: 4193008 DMA zone: 1729 pages, LIFO batch:0 DMA32 zone: 766856 pages, LIFO batch:31 Normal zone: 3361280 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 8 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 PM: Registered nosave memory: 00000000bfb50000 - 00000000bfb66000 PM: Registered nosave memory: 00000000bfb66000 - 00000000bfb85000 PM: Registered nosave memory: 00000000bfb85000 - 00000000bfb86000 PM: Registered nosave memory: 00000000bfb86000 - 00000000c0000000 PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000 PM: Registered nosave memory: 00000000fe000000 - 0000000100000000 Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) PERCPU: Allocating 65184 bytes of per cpu data NR_CPUS: 64, nr_cpu_ids: 8, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4129865 Policy zone: Normal Kernel command line: ro root=UUID=7104b60f-eac5-421a-8910-88d75932c822 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC: PIT calibration confirmed by PMTIMER. TSC: using PIT calibration value Detected 2493.736 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing software IO TLB between 0x20000000 - 0x24000000 Memory: 16463168k/17825792k available (3310k kernel code, 308864k reserved, 1840k data, 1296k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 4987.47 BogoMIPS (lpj=2493736) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys devices CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM1) using mwait in idle threads. ACPI: Core revision 20080609 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 0a Using local APIC timer interrupts. APIC timer calibration result 20781172 Detected 20.781 MHz APIC timer. Booting processor 1/4 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4987.55 BogoMIPS (lpj=2493776) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 1/4 -> Node 0 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 0a checking TSC synchronization [CPU#0 -> CPU#1]: passed. Booting processor 2/2 ip 6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 4987.54 BogoMIPS (lpj=2493773) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 2/2 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 CPU2: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 CPU2: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 0a checking TSC synchronization [CPU#0 -> CPU#2]: passed. Booting processor 3/6 ip 6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 4987.55 BogoMIPS (lpj=2493776) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 3/6 -> Node 0 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 2 CPU3: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 CPU3: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 0a checking TSC synchronization [CPU#0 -> CPU#3]: passed. Booting processor 4/1 ip 6000 Initializing CPU#4 Calibrating delay using timer specific routine.. 4987.53 BogoMIPS (lpj=2493765) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 4/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU4: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106 CPU4: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 0a checking TSC synchronization [CPU#0 -> CPU#4]: passed. Booting processor 5/5 ip 6000 Initializing CPU#5 Calibrating delay using timer specific routine.. 4987.53 BogoMIPS (lpj=2493768) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 5/5 -> Node 0 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 1 CPU5: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106 CPU5: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 0a checking TSC synchronization [CPU#0 -> CPU#5]: passed. Booting processor 6/3 ip 6000 Initializing CPU#6 Calibrating delay using timer specific routine.. 4987.52 BogoMIPS (lpj=2493760) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 6/3 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 CPU6: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106 CPU6: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 0a checking TSC synchronization [CPU#0 -> CPU#6]: passed. Booting processor 7/7 ip 6000 Initializing CPU#7 Calibrating delay using timer specific routine.. 4987.53 BogoMIPS (lpj=2493765) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 7/7 -> Node 0 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 3 CPU7: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106 CPU7: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz stepping 0a checking TSC synchronization [CPU#0 -> CPU#7]: passed. Brought up 8 CPUs Total of 8 processors activated (39900.23 BogoMIPS). sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=208 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=5904 bytes CPU0 attaching sched-domain: domain 0: span 0,4 level MC groups: 0 4 domain 1: span 0-7 level CPU groups: 0,4 1,5 2,6 3,7 domain 2: span 0-7 level NODE groups: 0-7 CPU1 attaching sched-domain: domain 0: span 1,5 level MC groups: 1 5 domain 1: span 0-7 level CPU groups: 1,5 2,6 3,7 0,4 domain 2: span 0-7 level NODE groups: 0-7 CPU2 attaching sched-domain: domain 0: span 2,6 level MC groups: 2 6 domain 1: span 0-7 level CPU groups: 2,6 3,7 0,4 1,5 domain 2: span 0-7 level NODE groups: 0-7 CPU3 attaching sched-domain: domain 0: span 3,7 level MC groups: 3 7 domain 1: span 0-7 level CPU groups: 3,7 0,4 1,5 2,6 domain 2: span 0-7 level NODE groups: 0-7 CPU4 attaching sched-domain: domain 0: span 0,4 level MC groups: 4 0 domain 1: span 0-7 level CPU groups: 0,4 1,5 2,6 3,7 domain 2: span 0-7 level NODE groups: 0-7 CPU5 attaching sched-domain: domain 0: span 1,5 level MC groups: 5 1 domain 1: span 0-7 level CPU groups: 1,5 2,6 3,7 0,4 domain 2: span 0-7 level NODE groups: 0-7 CPU6 attaching sched-domain: domain 0: span 2,6 level MC groups: 6 2 domain 1: span 0-7 level CPU groups: 2,6 3,7 0,4 1,5 domain 2: span 0-7 level NODE groups: 0-7 CPU7 attaching sched-domain: domain 0: span 3,7 level MC groups: 7 3 domain 1: span 0-7 level CPU groups: 3,7 0,4 1,5 2,6 domain 2: span 0-7 level NODE groups: 0-7 net_namespace: 1552 bytes Booting paravirtualized kernel on bare hardware Time: 21:33:53 Date: 05/13/10 NET: Registered protocol family 16 No dock devices found. ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 for base access PCI: Dell PowerEdge 2950 detected, enabling pci=bfsort. ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org ACPI: Interpreter enabled ACPI: (supports S0 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: PME# supported from D0 D3hot D3cold pci 0000:00:00.0: PME# disabled pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: PME# disabled pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:07.0: PME# supported from D0 D3hot D3cold pci 0000:00:07.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled PCI: 0000:00:1d.0 reg 20 io port: [cce0, ccff] PCI: 0000:00:1d.1 reg 20 io port: [ccc0, ccdf] PCI: 0000:00:1d.2 reg 20 io port: [cca0, ccbf] PCI: 0000:00:1d.3 reg 20 io port: [cc80, cc9f] PCI: 0000:00:1d.7 reg 10 32bit mmio: [fc600400, fc6007ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled PCI: 0000:00:1f.2 reg 10 io port: [cc78, cc7f] PCI: 0000:00:1f.2 reg 14 io port: [cc70, cc73] PCI: 0000:00:1f.2 reg 18 io port: [cc60, cc67] PCI: 0000:00:1f.2 reg 1c io port: [cc58, cc5b] PCI: 0000:00:1f.2 reg 20 io port: [cc40, cc4f] PCI: 0000:00:1f.2 reg 24 32bit mmio: [fc600000, fc6003ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:04:00.0: PME# supported from D0 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:04:00.3: PME# supported from D0 D3hot D3cold pci 0000:04:00.3: PME# disabled PCI: bridge 0000:00:02.0 32bit mmio: [f2000000, f7ffffff] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold pci 0000:05:00.0: PME# disabled pci 0000:05:01.0: PME# supported from D0 D3hot D3cold pci 0000:05:01.0: PME# disabled PCI: bridge 0000:04:00.0 32bit mmio: [f4000000, f7ffffff] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold pci 0000:06:00.0: PME# disabled PCI: bridge 0000:05:00.0 32bit mmio: [f4000000, f7ffffff] PCI: 0000:07:00.0 reg 10 64bit mmio: [f4000000, f5ffffff] pci 0000:07:00.0: PME# supported from D3hot D3cold pci 0000:07:00.0: PME# disabled PCI: bridge 0000:06:00.0 32bit mmio: [f4000000, f7ffffff] PCI: 0000:01:00.0 reg 10 io port: [ec00, ecff] PCI: 0000:01:00.0 reg 14 64bit mmio: [fc4fc000, fc4fffff] PCI: 0000:01:00.0 reg 1c 64bit mmio: [fc4e0000, fc4effff] PCI: 0000:01:00.0 reg 30 32bit mmio: [fc500000, fc5fffff] pci 0000:01:00.0: supports D1 pci 0000:01:00.0: supports D2 PCI: bridge 0000:00:03.0 io port: [e000, efff] PCI: bridge 0000:00:03.0 32bit mmio: [fc300000, fc5fffff] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: PME# disabled PCI: bridge 0000:00:1c.0 32bit mmio: [f8000000, fbffffff] PCI: 0000:03:00.0 reg 10 64bit mmio: [f8000000, f9ffffff] pci 0000:03:00.0: PME# supported from D3hot D3cold pci 0000:03:00.0: PME# disabled PCI: bridge 0000:02:00.0 32bit mmio: [f8000000, fbffffff] PCI: 0000:0e:0d.0 reg 10 32bit mmio: [d8000000, dfffffff] PCI: 0000:0e:0d.0 reg 14 io port: [dc00, dcff] PCI: 0000:0e:0d.0 reg 18 32bit mmio: [fc2d0000, fc2dffff] PCI: 0000:0e:0d.0 reg 30 32bit mmio: [0, 1ffff] pci 0000:0e:0d.0: supports D1 pci 0000:0e:0d.0: supports D2 pci 0000:00:1e.0: transparent bridge PCI: bridge 0000:00:1e.0 io port: [d000, dfff] PCI: bridge 0000:00:1e.0 32bit mmio: [fc100000, fc2fffff] PCI: bridge 0000:00:1e.0 64bit mmio pref: [d8000000, dfffffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.PE2P._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBEX._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 *10 11 12) ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 *6 7 10 11 12) ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 10 11 12) *14 ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 11 12) *15 ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 *11 12) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 5 Switched to high resolution mode on CPU 3 Switched to high resolution mode on CPU 4 Switched to high resolution mode on CPU 7 Switched to high resolution mode on CPU 2 Switched to high resolution mode on CPU 6 tracer: 1286 pages allocated for 65536 entries of 80 bytes actual entries 65586 ACPI: RTC can wake from S4 system 00:08: ioport range 0x800-0x87f has been reserved system 00:08: ioport range 0x880-0x8bf has been reserved system 00:08: ioport range 0x8c0-0x8df has been reserved system 00:08: ioport range 0x8e0-0x8e3 has been reserved system 00:08: ioport range 0x900-0x900 has been reserved system 00:08: ioport range 0xc00-0xc7f has been reserved system 00:08: ioport range 0xca0-0xca7 has been reserved system 00:08: ioport range 0xca9-0xcab has been reserved system 00:08: ioport range 0xcad-0xcaf has been reserved system 00:09: ioport range 0xca8-0xca8 has been reserved system 00:09: ioport range 0xcac-0xcac has been reserved system 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved pci 0000:06:00.0: PCI bridge, secondary bus 0000:07 pci 0000:06:00.0: IO window: disabled pci 0000:06:00.0: MEM window: 0xf4000000-0xf7ffffff pci 0000:06:00.0: PREFETCH window: disabled pci 0000:05:00.0: PCI bridge, secondary bus 0000:06 pci 0000:05:00.0: IO window: disabled pci 0000:05:00.0: MEM window: 0xf4000000-0xf7ffffff pci 0000:05:00.0: PREFETCH window: disabled pci 0000:05:01.0: PCI bridge, secondary bus 0000:08 pci 0000:05:01.0: IO window: disabled pci 0000:05:01.0: MEM window: disabled pci 0000:05:01.0: PREFETCH window: disabled pci 0000:04:00.0: PCI bridge, secondary bus 0000:05 pci 0000:04:00.0: IO window: disabled pci 0000:04:00.0: MEM window: 0xf4000000-0xf7ffffff pci 0000:04:00.0: PREFETCH window: disabled pci 0000:04:00.3: PCI bridge, secondary bus 0000:09 pci 0000:04:00.3: IO window: disabled pci 0000:04:00.3: MEM window: disabled pci 0000:04:00.3: PREFETCH window: disabled pci 0000:00:02.0: PCI bridge, secondary bus 0000:04 pci 0000:00:02.0: IO window: disabled pci 0000:00:02.0: MEM window: 0xf2000000-0xf7ffffff pci 0000:00:02.0: PREFETCH window: disabled pci 0000:00:03.0: PCI bridge, secondary bus 0000:01 pci 0000:00:03.0: IO window: 0xe000-0xefff pci 0000:00:03.0: MEM window: 0xfc300000-0xfc5fffff pci 0000:00:03.0: PREFETCH window: disabled pci 0000:00:04.0: PCI bridge, secondary bus 0000:0a pci 0000:00:04.0: IO window: disabled pci 0000:00:04.0: MEM window: disabled pci 0000:00:04.0: PREFETCH window: disabled pci 0000:00:05.0: PCI bridge, secondary bus 0000:0b pci 0000:00:05.0: IO window: disabled pci 0000:00:05.0: MEM window: disabled pci 0000:00:05.0: PREFETCH window: disabled pci 0000:00:06.0: PCI bridge, secondary bus 0000:0c pci 0000:00:06.0: IO window: disabled pci 0000:00:06.0: MEM window: disabled pci 0000:00:06.0: PREFETCH window: disabled pci 0000:00:07.0: PCI bridge, secondary bus 0000:0d pci 0000:00:07.0: IO window: disabled pci 0000:00:07.0: MEM window: disabled pci 0000:00:07.0: PREFETCH window: disabled pci 0000:02:00.0: PCI bridge, secondary bus 0000:03 pci 0000:02:00.0: IO window: disabled pci 0000:02:00.0: MEM window: 0xf8000000-0xfbffffff pci 0000:02:00.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: 0xf8000000-0xfbffffff pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0e pci 0000:00:1e.0: IO window: 0xd000-0xdfff pci 0000:00:1e.0: MEM window: 0xfc100000-0xfc2fffff pci 0000:00:1e.0: PREFETCH window: 0x000000d8000000-0x000000dfffffff pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 pci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:04:00.0: setting latency timer to 64 pci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:05:00.0: setting latency timer to 64 pci 0000:06:00.0: setting latency timer to 64 pci 0000:05:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:05:01.0: setting latency timer to 64 pci 0000:04:00.3: setting latency timer to 64 pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:03.0: setting latency timer to 64 pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:04.0: setting latency timer to 64 pci 0000:00:05.0: setting latency timer to 64 pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:06.0: setting latency timer to 64 pci 0000:00:07.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:02:00.0: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 04 index 0 mmio: [0, 0] bus: 04 index 1 mmio: [f2000000, f7ffffff] bus: 04 index 2 mmio: [0, 0] bus: 04 index 3 mmio: [0, 0] bus: 05 index 0 mmio: [0, 0] bus: 05 index 1 mmio: [f4000000, f7ffffff] bus: 05 index 2 mmio: [0, 0] bus: 05 index 3 mmio: [0, 0] bus: 06 index 0 mmio: [0, 0] bus: 06 index 1 mmio: [f4000000, f7ffffff] bus: 06 index 2 mmio: [0, 0] bus: 06 index 3 mmio: [0, 0] bus: 07 index 0 mmio: [0, 0] bus: 07 index 1 mmio: [f4000000, f7ffffff] bus: 07 index 2 mmio: [0, 0] bus: 07 index 3 mmio: [0, 0] bus: 08 index 0 mmio: [0, 0] bus: 08 index 1 mmio: [0, 0] bus: 08 index 2 mmio: [0, 0] bus: 08 index 3 mmio: [0, 0] bus: 09 index 0 mmio: [0, 0] bus: 09 index 1 mmio: [0, 0] bus: 09 index 2 mmio: [0, 0] bus: 09 index 3 mmio: [0, 0] bus: 01 index 0 io port: [e000, efff] bus: 01 index 1 mmio: [fc300000, fc5fffff] bus: 01 index 2 mmio: [0, 0] bus: 01 index 3 mmio: [0, 0] bus: 0a index 0 mmio: [0, 0] bus: 0a index 1 mmio: [0, 0] bus: 0a index 2 mmio: [0, 0] bus: 0a index 3 mmio: [0, 0] bus: 0b index 0 mmio: [0, 0] bus: 0b index 1 mmio: [0, 0] bus: 0b index 2 mmio: [0, 0] bus: 0b index 3 mmio: [0, 0] bus: 0c index 0 mmio: [0, 0] bus: 0c index 1 mmio: [0, 0] bus: 0c index 2 mmio: [0, 0] bus: 0c index 3 mmio: [0, 0] bus: 0d index 0 mmio: [0, 0] bus: 0d index 1 mmio: [0, 0] bus: 0d index 2 mmio: [0, 0] bus: 0d index 3 mmio: [0, 0] bus: 02 index 0 mmio: [0, 0] bus: 02 index 1 mmio: [f8000000, fbffffff] bus: 02 index 2 mmio: [0, 0] bus: 02 index 3 mmio: [0, 0] bus: 03 index 0 mmio: [0, 0] bus: 03 index 1 mmio: [f8000000, fbffffff] bus: 03 index 2 mmio: [0, 0] bus: 03 index 3 mmio: [0, 0] bus: 0e index 0 io port: [d000, dfff] bus: 0e index 1 mmio: [fc100000, fc2fffff] bus: 0e index 2 mmio: [d8000000, dfffffff] bus: 0e index 3 io port: [0, ffff] bus: 0e index 4 mmio: [0, ffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 4109k freed audit: initializing netlink socket (disabled) type=2000 audit(1273786432.987:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 32162 SELinux: Registering netfilter hooks Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:0e:0d.0: Boot video device pcieport-driver 0000:00:02.0: setting latency timer to 64 pcieport-driver 0000:00:02.0: found MSI capability pci_express 0000:00:02.0:pcie00: allocate port service pci_express 0000:00:02.0:pcie01: allocate port service pcieport-driver 0000:00:03.0: setting latency timer to 64 pcieport-driver 0000:00:03.0: found MSI capability pci_express 0000:00:03.0:pcie00: allocate port service pci_express 0000:00:03.0:pcie01: allocate port service pcieport-driver 0000:00:04.0: setting latency timer to 64 pcieport-driver 0000:00:04.0: found MSI capability pci_express 0000:00:04.0:pcie00: allocate port service pci_express 0000:00:04.0:pcie01: allocate port service pcieport-driver 0000:00:05.0: setting latency timer to 64 pcieport-driver 0000:00:05.0: found MSI capability pci_express 0000:00:05.0:pcie00: allocate port service pci_express 0000:00:05.0:pcie01: allocate port service pcieport-driver 0000:00:06.0: setting latency timer to 64 pcieport-driver 0000:00:06.0: found MSI capability pci_express 0000:00:06.0:pcie00: allocate port service pci_express 0000:00:06.0:pcie01: allocate port service pcieport-driver 0000:00:07.0: setting latency timer to 64 pcieport-driver 0000:00:07.0: found MSI capability pci_express 0000:00:07.0:pcie00: allocate port service pci_express 0000:00:07.0:pcie01: allocate port service pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie03: allocate port service pcieport-driver 0000:04:00.0: setting latency timer to 64 pci_express 0000:04:00.0:pcie11: allocate port service pcieport-driver 0000:05:00.0: setting latency timer to 64 pcieport-driver 0000:05:00.0: found MSI capability pci_express 0000:05:00.0:pcie21: allocate port service pcieport-driver 0000:05:01.0: setting latency timer to 64 pcieport-driver 0000:05:01.0: found MSI capability pci_express 0000:05:01.0:pcie21: allocate port service aer 0000:00:02.0:pcie01: service driver aer loaded aer 0000:00:03.0:pcie01: service driver aer loaded aer 0000:00:04.0:pcie01: service driver aer loaded IRQ handler type mismatch for IRQ 0 current handler: timer Pid: 1, comm: swapper Not tainted 2.6.27.30-170.2.82.fc10.x86_64 #1 Call Trace: [] setup_irq+0x286/0x2ab [] ? aer_irq+0x66/0x111 [] ? aer_irq+0x0/0x111 [] request_irq+0x10d/0x136 [] ? early_idt_handler+0x0/0x71 [] aer_probe+0xc5/0x148 [] pcie_port_probe_service+0x3a/0x84 [] driver_probe_device+0xc0/0x16e [] __driver_attach+0x4f/0x79 [] ? __driver_attach+0x0/0x79 [] bus_for_each_dev+0x4f/0x89 [] driver_attach+0x1c/0x1e [] bus_add_driver+0xb1/0x1e5 [] driver_register+0xa8/0x116 [] ? aer_service_init+0x0/0x20 [] ? early_idt_handler+0x0/0x71 [] pcie_port_service_register+0x47/0x49 [] aer_service_init+0x1e/0x20 [] do_one_initcall+0x47/0x12e [] ? early_idt_handler+0x0/0x71 [] ? dnotify_parent+0x5e/0x7c [] kernel_init+0x1c0/0x214 [] ? trace_hardirqs_on_thunk+0x3a/0x3c [] child_rip+0xa/0x11 [] ? restore_args+0x0/0x30 [] ? kernel_init+0x0/0x214 [] ? child_rip+0x0/0x11 aer 0000:00:05.0:pcie01: request IRQ failed aer: probe of 0000:00:05.0:pcie01 failed with error -16 aer 0000:00:06.0:pcie01: service driver aer loaded IRQ handler type mismatch for IRQ 0 current handler: timer Pid: 1, comm: swapper Not tainted 2.6.27.30-170.2.82.fc10.x86_64 #1 Call Trace: [] setup_irq+0x286/0x2ab [] ? aer_irq+0x66/0x111 [] ? aer_irq+0x0/0x111 [] request_irq+0x10d/0x136 [] ? early_idt_handler+0x0/0x71 [] aer_probe+0xc5/0x148 [] pcie_port_probe_service+0x3a/0x84 [] driver_probe_device+0xc0/0x16e [] __driver_attach+0x4f/0x79 [] ? __driver_attach+0x0/0x79 [] bus_for_each_dev+0x4f/0x89 [] driver_attach+0x1c/0x1e [] bus_add_driver+0xb1/0x1e5 [] driver_register+0xa8/0x116 [] ? aer_service_init+0x0/0x20 [] ? early_idt_handler+0x0/0x71 [] pcie_port_service_register+0x47/0x49 [] aer_service_init+0x1e/0x20 [] do_one_initcall+0x47/0x12e [] ? early_idt_handler+0x0/0x71 [] ? dnotify_parent+0x5e/0x7c [] kernel_init+0x1c0/0x214 [] ? trace_hardirqs_on_thunk+0x3a/0x3c [] child_rip+0xa/0x11 [] ? restore_args+0x0/0x30 [] ? kernel_init+0x0/0x214 [] ? child_rip+0x0/0x11 aer 0000:00:07.0:pcie01: request IRQ failed aer: probe of 0000:00:07.0:pcie01 failed with error -16 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] ACPI: CPU0 (power states: C1[C1] C3[C3]) processor ACPI0007:00: registered as cooling_device0 ACPI: CPU1 (power states: C1[C1] C3[C3]) processor ACPI0007:01: registered as cooling_device1 ACPI: CPU2 (power states: C1[C1] C3[C3]) processor ACPI0007:02: registered as cooling_device2 ACPI: CPU3 (power states: C1[C1] C3[C3]) processor ACPI0007:03: registered as cooling_device3 ACPI: CPU4 (power states: C1[C1] C3[C3]) processor ACPI0007:04: registered as cooling_device4 ACPI: CPU5 (power states: C1[C1] C3[C3]) processor ACPI0007:05: registered as cooling_device5 ACPI: CPU6 (power states: C1[C1] C3[C3]) processor ACPI0007:06: registered as cooling_device6 ACPI: CPU7 (power states: C1[C1] C3[C3]) processor ACPI0007:07: registered as cooling_device7 hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.103 Serial: 8250/16550 driver4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input1 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ata_piix 0000:00:1f.2: version 2.12 ata_piix 0000:00:1f.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0xcc78 ctl 0xcc70 bmdma 0xcc40 irq 23 ata2: SATA max UDMA/133 cmd 0xcc60 ctl 0xcc58 bmdma 0xcc48 irq 23 ata2.01: NODEV after polling detection ata2.00: ATAPI: TEAC DVD-ROM DV28SV, D.0J, max UDMA/100 ata2.00: configured for UDMA/100 scsi 1:0:0:0: CD-ROM TEAC DVD-ROM DV28SV D.0J PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 62x/62x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg0 type 5 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfc600400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27.30-170.2.82.fc10.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000cce0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27.30-170.2.82.fc10.x86_64 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000ccc0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 1-5: new high speed USB device using ehci_hcd and address 3 usb 1-5: configuration #1 chosen from 1 choice hub 1-5:1.0: USB hub found hub 1-5:1.0: 4 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.27.30-170.2.82.fc10.x86_64 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000cca0 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 1-5: New USB device found, idVendor=04b4, idProduct=6560 usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 3-1: new low speed USB device using uhci_hcd and address 2 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.27.30-170.2.82.fc10.x86_64 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000cc80 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.27.30-170.2.82.fc10.x86_64 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice usb 3-1: configuration #1 chosen from 1 choice usb 3-1: New USB device found, idVendor=0624, idProduct=0294 usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: Dell 03R874 usb 3-1: Manufacturer: Avocent rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day, y3k, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev input: Avocent Dell 03R874 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input2 input,hidraw0: USB HID v1.10 Keyboard [Avocent Dell 03R874] on usb-0000:00:1d.1-1 input: Avocent Dell 03R874 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input3 input,hidraw1: USB HID v1.10 Mouse [Avocent Dell 03R874] on usb-0000:00:1d.1-1 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 registered taskstats version 1 Magic number: 10:228:601 Freeing unused kernel memory: 1296k freed Write protecting the kernel read-only data: 4756k [drm] Initialized drm 1.1.0 20060810 pci 0000:0e:0d.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [drm] Initialized radeon 1.29.0 20080528 on minor 0 Fusion MPT base driver 3.04.07 Copyright (c) 1999-2008 LSI Corporation Fusion MPT SAS Host driver 3.04.07 mptsas 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 mptbase: ioc0: Initiating bringup ioc0: LSISAS1068E B3: Capabilities={Initiator} mptsas 0000:01:00.0: setting latency timer to 64 scsi2 : ioc0: LSISAS1068E B3, FwRev=00192f00h, Ports=1, MaxQ=266, IRQ=16 scsi 2:0:0:0: Direct-Access SEAGATE ST373455SS S52A PQ: 0 ANSI: 5 scsi 2:0:0:0: Attached scsi generic sg1 type 0 scsi 2:0:1:0: Direct-Access SEAGATE ST373455SS S52A PQ: 0 ANSI: 5 scsi 2:0:1:0: Attached scsi generic sg2 type 0 scsi 2:0:2:0: Direct-Access SEAGATE ST3146855SS S52A PQ: 0 ANSI: 5 scsi 2:0:2:0: Attached scsi generic sg3 type 0 scsi 2:0:3:0: Direct-Access SEAGATE ST3146855SS S52A PQ: 0 ANSI: 5 scsi 2:0:3:0: Attached scsi generic sg4 type 0 scsi 2:1:0:0: Direct-Access Dell VIRTUAL DISK 1028 PQ: 0 ANSI: 5 sd 2:1:0:0: [sda] 142082048 512-byte hardware sectors (72746 MB) sd 2:1:0:0: [sda] Write Protect is off sd 2:1:0:0: [sda] Mode Sense: 03 00 00 08 sd 2:1:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 2:1:0:0: [sda] 142082048 512-byte hardware sectors (72746 MB) sd 2:1:0:0: [sda] Write Protect is off sd 2:1:0:0: [sda] Mode Sense: 03 00 00 08 sd 2:1:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 2:1:0:0: [sda] Attached SCSI disk sd 2:1:0:0: Attached scsi generic sg5 type 0 scsi 2:1:2:0: Direct-Access Dell VIRTUAL DISK 1028 PQ: 0 ANSI: 5 sd 2:1:2:0: [sdb] 285474816 512-byte hardware sectors (146163 MB) sd 2:1:2:0: [sdb] Write Protect is off sd 2:1:2:0: [sdb] Mode Sense: 03 00 00 08 sd 2:1:2:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 2:1:2:0: [sdb] 285474816 512-byte hardware sectors (146163 MB) sd 2:1:2:0: [sdb] Write Protect is off sd 2:1:2:0: [sdb] Mode Sense: 03 00 00 08 sd 2:1:2:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sdb: unknown partition table sd 2:1:2:0: [sdb] Attached SCSI disk sd 2:1:2:0: Attached scsi generic sg6 type 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1273786485.089:2): selinux=0 auid=4294967295 ses=4294967295 udevd version 127 started Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.8.0 (Aug 14, 2008) bnx2 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 16, node addr 00:24:e8:60:93:8f bnx2 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 16, node addr 00:24:e8:60:93:91 EDAC MC: Ver: 2.1.0 Aug 17 2009 EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0 EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED) intel_rng: FWH not detected input: PC Speaker as /devices/platform/pcspkr/input/input4 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) iTCO_wdt: Found a 631xESB/632xESB TCO device (Version=2, TCOBASE=0x0860) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) floppy0: no floppy controllers found floppy0: no floppy controllers found device-mapper: multipath: version 1.0.5 loaded EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 18513912k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:18513912k